FILLTUBE Machines are designed to fill and seal plastic, laminated and aluminium tubes at high speeds. These machines are specially suitable for pharmaceutical, cosmetic and food industries. FILLTUBE machines are used mainly for filling of cream, ointment, get, paste, balm and other similar viscous products by means of volumetric dosing system. These machines are designed and manufactured to suit GMP requirements, all contact parts are stainless steel, well-polished and mirror buffed. These machines are produced from tested and reliable materials for long service life. Some of the Important Features include: # Enclosed machine - acrylic doors on all four sides above main frame # Tail cutting by ‘suck back’ Method # Step-less adjustments of filling volume # Adjustable anti-vibration legs # Step-less adjustments of filling volume # Contact less heating of lami / plastic tube by Leister make* hot air tool # Fill accuracy better than ± 1% # No tube no fill safety system # Safety interlock for acrylic doors # Low air pressure switch # Low heating temperature interlock # Control sensor for non-ejected tubes* # Emergency stop Optional Features include: # Jacketed hopper with electrical heater for water heating and hot water circulation pump # Slow speed agitator # Tube cleaning by air blow or suction* # Nitrogen flushing arrangement # Batch number and date embossing on crimp # Automatic hopper top up system # PLC control of machine The machine is of fully enclosed construction with a rotary index table and single filling head. Machine is available in 3 configurations – # for aluminium tubes # for lami (laminated)/ plastic tubes # for alu + lami tubes Specifications: Model FILLTUBE – 60 FILLTUBE - 120 Types of Tubes Laminated / Plastic & Aluminium Laminated & Plastic Tube Diameters 12mm to 40mm 16mm to 25mm Tube Lengths 50mm to 180mm 50mm to 180mm Fill Volumes 10ml to 170ml 10ml to 60ml Fill Weights (Ointments) 5gms to 150 gms 5gms to 150 gms Max. Output (Per Min) 60 Tubes 120 Tubes Special Models: Semi-Automatic Models, Models with large filling volumes (Up to 350ml) and large tube diameters (up to 60mm), models for cyanoacrylate filling with peristaltic pump for filling are also available. Details can be shared on request.

ATF-I is designed to fill and seal aluminium / lami / plastic tubes at high speeds. The machine is suitable mainly for pharmaceutical, cosmetic and food industry. Machine can be used for filling of cream, ointment, gel, paste, balm and other similar viscous products by means of a volumetric dosing system. The machine is of fully enclosed construction with a rotary index table and single filling head. Machine is available in 3 configurations – # for aluminium tubes # for lami (laminated)/ plastic tubes # for alu + lami tubes The Technical Specs are as Follows: # Construction: Fully enclosed # Operation System Single Head, Rotary Index Table # Output 2400 tubes per hour for lami tubes; 3000 tubes per hour for alu tubes # Tube Diameter Minimum 12 mm to maximum 35 mm for alu, maximum 50 mm for lami # Tube Length Minimum 50 mm to maximum 220 mm # Tube Loading Automatic through a tube holding tray (also known as ‘ tube loading hopper ’ – to be manually loaded) # Tube Orientation Automatic, electronically controlled # Tube Cleaning By compressed air blow # Product Hopper S.S. 304, 50 liters capacity. {Water jacket with electrical heating and hot water circulation pump optional} # Product Agitator Slow speed agitator for stirring of product in hopper as an option # Filling Nozzle Fixed nozzle, with tube lifting at filling station – to lift up the tube so that nozzle gets inserted inside tube while filling. {Diving nozzle optional}. NO−TUBE−NO−FILL system incorporated. # Tail Cutting By suck-back method (to prevent dripping after filling operation) # Dozing Range a) 3 to 30 ml, b) 30 to 100 ml, c) 100 to 250 ml # Tube Sealing By hot air tool for plastic and lami tubes; By double fold and crimping tool for aluminium tubes # Batch Code Embossing In sealing jaws for plastic / lami tubes and in crimping jaws for alu tubes # Trim Waste Collected in a container on machine # Tube Ejection Automatic, through a discharge chute for collection About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/automatic-tube-filling-machine-manufacturer-india.php

FBD (FLUID BED DRYER) Salient Features: # Better productivity and lesser drying time. # Less handing, more hygienic. # Uniform drying at low temperature. # Pneumatic sealing for higher capacity models. # Static grounders to eliminate electro-static charge # Product container with tilting arrangement. # Flame proof models also available. # Models available from 2 Kg. To 300 Kg Description: A Fluid Bed Dryer with latest improvement in design make this unit a truly versatile one for pharmaceutical, food, dyestuff, chemical and polymer industries. All contact parts are made out of S.S.304/316 and are provided with isolated control panel. Operation: Due to induced draft created by specially designed heavy duty fan the atmospheric air is drawn through the 5 micron air filter. The filtered air is then to the required temperature by electric heaters / steam radiator. The hot air passes through the product container and the product gets dried by Air fluidisation and the air control circulation by damper. The filter bag prevents fine particles from carrying over to exhaust air steam. Selection: Selection of capacity of fluid bed dryer depends upon bulk density, drying temperature and moisture contents of wet material to be dried. In case of 120 kg model a batch of 145 kg wet material can be loaded provided the bulk density of the material is 0.6kg/lit. (approx) Optional: # Digital temperature controller cum indicator for steam operated dryer. # Pneumatic bag shaking device. # Intrinsically safe earthing system. # Bottom & rear chambers made our of S.S.-304 quality # Flame proof Motor with push button station. # Available in GMP / S.S. Models About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/fluid-bed-dryer-manufacturer-india.php

SATF is designed to fill and seal aluminium / plastic / lami tubes. The machine is suitable mainly for pharmaceutical, cosmetic and food industry. Machine can be used for filling of cream, ointment, gel, paste, balm and other similar viscous products by means of a volumetric dosing system. Machine available in two configurations: # for aluminium tubes # for lami (laminated)/ plastic tubes The Technical Specs are as Follows: # Construction: Partially enclosed # Operation System Single Head, Rotary Index Table # Output Upto 1800 tubes per hour for alu tubes; 2400 tubes per hour for lami and plastic tubes # Products Handled Cream, ointment, gel, paste, balm and other similar viscous products # Tube Diameter Minimum 12 mm to maximum 50 mm # Tube Length Minimum 50 mm to maximum 220 mm # Tube Loading To be performed Manulally # Tube Orientation To be performed Manulally # Feeding Hopper S.S. 304, 50 liters capacity. {Water jacket with ele heating and hot water circulation pump optional} # Product Agitator Slow speed agitator for stirring of product in hopper as an option # Filling Nozzle Fixed nozzle, with tube lifting at filling station – to lift up the tube so that nozzle gets inserted inside tube while filling. {Diving nozzle optional}. NO−TUBE−NO−FILL system incorporated. # Tail Cutting By suck-back method (to prevent dripping after filling operation) # Dozing Range a) 3 to 30 ml, b) 30 to 100 ml, c) 100 to 250 ml # Tube Sealing By hot air tool for plastic and lami tubes; By double fold and crimping tool for aluminium tubes # Batch Code Embossing In sealing jaws for plastic / lami tubes and in crimping jaws for alu tubes # Tube Ejection Automatic, through a discharge chute for collection About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/semi-automatic-tube-filling-machine.php

Conventional coating pans are used to film coat or sugar coat tablets, pills, etc. Apart from the pharmaceutical industry, these machines are used in a variety of industries such as Pharmaceutical, Confectionery, Food and others. The product is to be filled inside the pan. During the rotation motion of the pan, coating material is sprayed by spraying system. At the same time hot air is supplied through inbuilt Hot air blower system which dries the coat rapidly. Thus a solid and smooth surface is formed over the product. # Suitable for sugar coating, film coating and coloring of tablets. # Mirror polished SS pans ensure uniform and excellent coating of tablets # Standard supply includes hot air blower # Thermostatically controlled heater provides regulated air upto 75ยบ C. # Specially designed stand allows changing of tilt angle of pan. # Variable speed drive. Standard Models: MODEL PAN SIZE APPROX.CAPACITY MAIN MOTOR BLOWER MOTOR CP-300 300 mm 8 kg. 0.37 kw. 0.18 kw CP-600 600 mm 30 kg. 0.75 kw. 0.18 kw CP-900 900 mm 50 kg. 0.75 kw. 0.37 kw CP-1050 1050 mm 70 kg 1.0 kw 0.37 kw CP-1200 1200 mm 100 kg. 2.2 kw. 0.75 kw CP-1500 1500 mm 150 kg. 3.7 kw. 1.0 kw Spray Coating Equipment: Spray coating machines for rapid and uniform coating of tablets, granules and pallets. Spray coating machine work as an attachment to the coating pan. These machines feature stainless steel 316 quality pressure vessel provided with SS jacket with electric heaters and thermostat control. # Suitable for film coating on tablets and granules. # Also used for sugar coating with some modifications. # Portable unit with various capacities. # All contact parts of SS 316 and non contact parts of SS 304. # Comprises of main vessel, SS stand for holding spray nozzles at different angles and various heights, pneumatic motor, air & solution control valve, pressure gauge, safely valve & spray nozzles. # Electric / steam jacket for heating. # Inbuilt homogenizer to prepare consistent solution. # Sequential ON-OFF timer for nozzles with Pneumatic cylinder. About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/coating-pan.php

BLISTRIP–I xt is a single track automatic blister packing machine for packing of tablets, capsules, dragees etc., in blister packs using PVC-Alu packaging materials. The Blister Forming, Product Feeding and Sealing operations are continuous by rotary motion while the indexing and punching operations are of intermittent reciprocating motion.The output capacity of the machine depends on the product characteristics. In case of slightly curved or flat tablets up to 10mm dia an output of 150 packs per minute can be optimally achieved. Features: # Combi packs possible for better utilization of capacity and packaging materials # Edge – to – edge cutting to eliminate trim waste between packs # Special tool design reduces trim waste # Continuous blister forming at low temperature by contact heating system # All change over parts and adjustments accessible from front side # Easy and quick change over reduces material wastage and down time # Simpler operation reduces operator fatigue – increases output # Very compact in size Specifications: # Max. Web Width 148 mm # Max. Forming depth 10 mm (Expandable up to 20) # Max. output: Packs/Min 150 (1 UP), 300 (2 UP) # Max. Strokes/Min 150 Efficiency: Our Competence and experience in package design ensures optimum utilization of machine capacity to give highest possible output as well as minimum possible packaging material consumption. Performance: Simplicity of design with careful placement of various stations giving operator full vision and total control of all principal functions of machine that enhances performance. Reliability: Solid structure and sturdy components together with easy to set up and maintain mechanism ensures maximum availability. Quick and easy change over from one format to another improves productivity.

BLISTRIP–II is a high speed automatic blister packing machine for packing of smaller and regular shaped solid articles such as pharmaceutical tablets, capsules, dragees etc., in blister packs using PVC-Alu packaging materials. The Blister Forming, Product Feeding and Sealing operations are continuous by rotary motion while the indexing and punching operations are of intermittent reciprocating motion.The output capacity of the machine depends on the product characteristics. In case of slightly curved or flat tablets up to 10mm dia an output of 300 packs per minute can be optimally achieved. Features: # High speed, High production, Cost effective # Machine with the highest output – to – investment ratio # Lowest cost per pack # Combi packs possible for better utilization of capacity and packaging materials # Edge – to – edge cutting to eliminate trim waste between packs # Special tool design reduces trim waste # Continuous blister forming at low temperature by contact heating system # All change over parts and adjustments accessible from front side # In-built water chiller available # Easy and quick change over reduces material wastage and down time # Simpler operation reduces operator fatigue – increases output # Extended guide track can accommodate up to four feeders to produce multi-product kit packs # High strokes rate gives you high outputs for all sizes of blisters Specifications: # Max. Web Width 210 mm # Max. Forming depth 10 mm (Expandable up to 20) # Max. output: Packs/Min 300 (2 UP), 450 (3 UP) # Max. Strokes/Min 150 Efficiency: Our Competence and experience in package design ensures optimum utilization of machine capacity to give highest possible output as well as minimum possible packaging material consumption. Performance: Simplicity of design with careful placement of various stations giving operator full vision and total control of all principal functions of machine that enhances performance. Reliability: Solid structure and sturdy components together with easy to set up and maintain mechanism ensures maximum availability. Quick and easy change over from one format to another improves productivity. Flexibility: The machine can handle wide range of forming and lidding materials, can be equipped with various types of feeding systems to handle most types and shapes of pharmaceutical tablets, hard capsules, soft capsules, pills as well as some irregular shaped objects in any presentation.

Our ENSULE series of machines are Fully Automatic Capsule Filling machines used to fill powders (in the form of slugs, pellets or mini tablets) in hard gelatin capsules. These are high speed, high performance machines that incorporate the latest international design and are built with precision using most appropriate materials and up-to-date manufacturing systems. Different models are available for various output requirements. Being extremely durable and reliable, these machines are also capable of filling multiple dosage combinations such as powder + pellets + tablet etc to the highest accuracy and are capable of filling all sizes from #00 to #5 of capsules. These are easy to clean and meets GMP standards. Features: # High Speed Production # PLC & Touch Screen controlled machine # Product handled: powder as standard. Pellet and tablet feeding devices optional # Compact, sturdy and meets cGMP standards # Suitability for capsule size: 00, 0, 1, 2, 3 and 4 - with size changeover # Dozing System: Tamping (slug formation through progressive compression) # Quick & easy fill weight adjustment # Tamping System for powders ensures accurate fill weight - accuracy of ± 2% # Powder sensor maintains constant level of powder in the dosing chamber # Audio alert on capsules running low in hopper # Line Machines like Empty Capsule Sorter and Elevator, Powder Charging Systems, Filled Capsule Polisher and Empty Capsule Rejection, Metal Detector, Damaged Capsule Rejection etc. are available as per customer requirements. Technical Specifications: ENSULE–400 # Rated Output (powder) 24,000 per hour # Rated Output (pellets) 15,000 per hour # Electrical Connection 415 V, 3 Ph AC + N + Earth (other voltage on request) # Power Consumption (incl drive, vacuum pump & ADU) 6.5 kw ENSULE–750 # Rated Output (powder) 45,000 per hour # Rated Output (pellets) 35,000 per hour # Electrical Connection 415 V, 3 Ph AC + N + Earth (other voltage on request) # Power Consumption (incl drive, vacuum pump & ADU) 6.5 kw ENSULE–1500 # Rated Output (powder) 90,000 per hour # Rated Output (pellets) 70,000 per hour # Electrical Connection 415 V, 3 Ph AC + N + Earth (other voltage on request) # Power Consumption (incl drive, vacuum pump & ADU) 8 kw ENSULE–2000 # Rated Output (powder) 120,000 per hour # Rated Output (pellets) 95,000 per hour # Electrical Connection 415 V, 3 Ph AC + N + Earth (other voltage on request) # Power Consumption (incl drive, vacuum pump & ADU) 8 kw Position wise functional sequence: Station 1: Empty Capsule loading and separation (x2 in case of ENSULE-2000 or ENSULE-1500), Pellet or Tablet Filling (optional) Station 2: Empty Capsule loading and separation Station 3: Tamping style Powder Filling (standard) Station 4: Pellet or Tablet Filling (optional) Station 5: Ejection of un-separated capsule Station 6: Idle Station 7: Capsule locking Station 8: Discharge of filled capsules Station 9: Segment cleaning

LTA -150 and LTA - 300 are Leak Test apparatus models by Jicon Technologies. 150 and 300 denotes the diameter of the dessicator. This is an ideal instrument to check sealing integrity of Blister Packs; Strip Packs; Sachet and Pouch Packs etc. It is also used for checking leaks from Capped Bottles; Induction Sealed Containers; Sealed Or Crimped Tubes etc The instrument is equipped with long lasting vacuum pump, which gives high level of vacuum (up to 550 Hg) in shortest possible time. Die pressed polycarbonate vacuum desiccator sustains vacuum for long time. A vacuum gauge is provided to indicate vacuum level. A vacuum flow control cum isolation valve is provided to disconnect the vacuum source, thus avoiding the need of continuous running of vacuum pump. A digital timer is provided to set vacuum hold time as desired. The apparatus’s amazing compactness saves lot of valuable space in process control laboratories.