RMG (RAPID MIXER GRANULATOR): The Rapid Mixer Granulator is designed to suit the requirements of Pharmaceutical and Chemical Industry. As the name suggests, this machine performs two operations - mixing and granulating. After mixing of dry powders or granules, subsequent wet granulation occurs producing loose granules, thus avoiding transfer of dry mixture. The mixing is achieved by paddle type impeller blades spinning close to bottom of the mixing bowl. The impeller blades are angled in a way that sets the entire mixture in a whirling - rising - tumbling motion ensuring a quick and even distribution of all dry components which leads to an even wetting of every granule. Dome shaped mixing bowl directs loose particles into whirling motion with help of impeller for efficient mixing. The large lumps formed during wet mixing are broken up by chopping tool rotating at 1440/2880 RPM. Specially designed chopper blades driven at high speed for fast and uniform granulation throughout the whole mass in mixing bowl. The mix can be discharged with the impeller running through outlet located on the side of the mixing bowl near its bottom. The mixing tool is easily removed from the drive shaft to facilitate easy cleaning of mixing bowl. The side discharge assembly is hinged for accessibility for cleaning. The machine offers following advantages: # Contact parts can be of SS 304/316 grade. # Control panel with display and timer. # All MS parts of machine are cladded / covered with SS sheets. # All components easily accessible for easy cleaning. # All electrical &pneumatic parts are prewired to simplify installation. # Limit switch provided on main lid for safe operation. # Discharge can be provided on either side to suit clients requirement. About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/rapid-mixer-granulator.php

Homogenizing, emulsifying, dispersing, mixing, extracting etc., catering to the needs of several industries; such as # Pharmaceutical Industry # Food, Dairy, Confectionery Industry # Chemical Industry # Paint Industry # Textile Industry # Cosmetic And Detergent Industry # Rubber Industry # Starch Industry # Paper Industry The product is subjected to high shearing, cutting, and rubbing forces between two toothed surfaces. The product, while passing down the hopper, initially gets sized in the preliminary breaking drum where it is broken and thrown into the first stator tooth stage. Due to conical arrangement and the centrifugal effect of the rotor rotating at a speed of 2800 r.p.m., the material is forced into second tooth stage. The tooth design of the grinding set causes powerful transients that subject the particle with high forces, Intensity of which increases as product reaches the lowest grinding stage. The ground material continuously leaves the mill through the outlet pipe and if required, can be recirculated. Outstanding and rigid design and construction combined with excellent quality of workmanship ensures superior end product, suitable for continuous operation over long periods of time. About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/colloid-mill.php

BLISTRIP–I xt is a single track automatic blister packing machine for packing of tablets, capsules, dragees etc., in blister packs using PVC-Alu packaging materials. The Blister Forming, Product Feeding and Sealing operations are continuous by rotary motion while the indexing and punching operations are of intermittent reciprocating motion.The output capacity of the machine depends on the product characteristics. In case of slightly curved or flat tablets up to 10mm dia an output of 150 packs per minute can be optimally achieved. Features: # Combi packs possible for better utilization of capacity and packaging materials # Edge – to – edge cutting to eliminate trim waste between packs # Special tool design reduces trim waste # Continuous blister forming at low temperature by contact heating system # All change over parts and adjustments accessible from front side # Easy and quick change over reduces material wastage and down time # Simpler operation reduces operator fatigue – increases output # Very compact in size Specifications: # Max. Web Width 148 mm # Max. Forming depth 10 mm (Expandable up to 20) # Max. output: Packs/Min 150 (1 UP), 300 (2 UP) # Max. Strokes/Min 150 Efficiency: Our Competence and experience in package design ensures optimum utilization of machine capacity to give highest possible output as well as minimum possible packaging material consumption. Performance: Simplicity of design with careful placement of various stations giving operator full vision and total control of all principal functions of machine that enhances performance. Reliability: Solid structure and sturdy components together with easy to set up and maintain mechanism ensures maximum availability. Quick and easy change over from one format to another improves productivity.

BLISTRIP–II is a high speed automatic blister packing machine for packing of smaller and regular shaped solid articles such as pharmaceutical tablets, capsules, dragees etc., in blister packs using PVC-Alu packaging materials. The Blister Forming, Product Feeding and Sealing operations are continuous by rotary motion while the indexing and punching operations are of intermittent reciprocating motion.The output capacity of the machine depends on the product characteristics. In case of slightly curved or flat tablets up to 10mm dia an output of 300 packs per minute can be optimally achieved. Features: # High speed, High production, Cost effective # Machine with the highest output – to – investment ratio # Lowest cost per pack # Combi packs possible for better utilization of capacity and packaging materials # Edge – to – edge cutting to eliminate trim waste between packs # Special tool design reduces trim waste # Continuous blister forming at low temperature by contact heating system # All change over parts and adjustments accessible from front side # In-built water chiller available # Easy and quick change over reduces material wastage and down time # Simpler operation reduces operator fatigue – increases output # Extended guide track can accommodate up to four feeders to produce multi-product kit packs # High strokes rate gives you high outputs for all sizes of blisters Specifications: # Max. Web Width 210 mm # Max. Forming depth 10 mm (Expandable up to 20) # Max. output: Packs/Min 300 (2 UP), 450 (3 UP) # Max. Strokes/Min 150 Efficiency: Our Competence and experience in package design ensures optimum utilization of machine capacity to give highest possible output as well as minimum possible packaging material consumption. Performance: Simplicity of design with careful placement of various stations giving operator full vision and total control of all principal functions of machine that enhances performance. Reliability: Solid structure and sturdy components together with easy to set up and maintain mechanism ensures maximum availability. Quick and easy change over from one format to another improves productivity. Flexibility: The machine can handle wide range of forming and lidding materials, can be equipped with various types of feeding systems to handle most types and shapes of pharmaceutical tablets, hard capsules, soft capsules, pills as well as some irregular shaped objects in any presentation.

LTA -150 and LTA - 300 are Leak Test apparatus models by Jicon Technologies. 150 and 300 denotes the diameter of the dessicator. This is an ideal instrument to check sealing integrity of Blister Packs; Strip Packs; Sachet and Pouch Packs etc. It is also used for checking leaks from Capped Bottles; Induction Sealed Containers; Sealed Or Crimped Tubes etc The instrument is equipped with long lasting vacuum pump, which gives high level of vacuum (up to 550 Hg) in shortest possible time. Die pressed polycarbonate vacuum desiccator sustains vacuum for long time. A vacuum gauge is provided to indicate vacuum level. A vacuum flow control cum isolation valve is provided to disconnect the vacuum source, thus avoiding the need of continuous running of vacuum pump. A digital timer is provided to set vacuum hold time as desired. The apparatus’s amazing compactness saves lot of valuable space in process control laboratories.

BLISTRIP–II is a high speed automatic blister packing machine for packing of smaller and regular shaped solid articles such as pharmaceutical tablets, capsules, dragees etc., in blister packs using PVC-Alu packaging materials. The Blister Forming, Product Feeding and Sealing operations are continuous by rotary motion while the indexing and punching operations are of intermittent reciprocating motion.The output capacity of the machine depends on the product characteristics. In case of slightly curved or flat tablets up to 10mm dia an output of 300 packs per minute can be optimally achieved. Features: High speed, High production, Cost effective # Combi packs possible for better utilization of capacity and packaging materials # Edge – to – edge cutting to eliminate trim waste between packs # Special tool design reduces trim waste # Continuous blister forming at low temperature by contact heating system # All change over parts and adjustments accessible from front side # In-built water chiller as standard # Easy and quick change over reduces material wastage and down time # Simpler operation reduces operator fatigue – increases output # Extended guide track can accommodate up to four feeders to produce multi-product kit packs Specifications: # Max. Web Width 210 mm # Max. Forming depth 10 mm (Expandable up to 20) # Max. output: Packs/Min 300 (2 UP), 450 (3 UP) # Max. Strokes/Min 150 Efficiency: Our Competence and experience in package design ensures optimum utilization of machine capacity to give highest possible output as well as minimum possible packaging material consumption. Performance: Simplicity of design with careful placement of various stations giving operator full vision and total control of all principal functions of machine that enhances performance. Reliability: Solid structure and sturdy components together with easy to set up and maintain mechanism ensures maximum availability. Quick and easy change over from one format to another improves productivity. About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/high-speed-automatic-blister-packing-machine-blistrip-ii.php

BLISTRIP–I xt is a single track automatic blister packing machine for packing of tablets, capsules, dragees etc., in blister packs using PVC-Alu packaging materials. The Blister Forming, Product Feeding and Sealing operations are continuous by rotary motion while the indexing and punching operations are of intermittent reciprocating motion.The output capacity of the machine depends on the product characteristics. In case of slightly curved or flat tablets up to 10mm dia an output of 150 packs per minute can be optimally achieved. Features: Combi packs possible for better utilization of capacity and packaging materials # Edge – to – edge cutting to eliminate trim waste between packs # Special tool design reduces trim waste # Continuous blister forming at low temperature by contact heating system # All change over parts and adjustments accessible from front side # In-built water chiller as standard # Easy and quick change over reduces material wastage and down time # Simpler operation reduces operator fatigue – increases output # Very compact in size Specifications: # Max. Web Width 148 mm # Max. Forming depth 10 mm (Expandable up to 20) # Max. output: Packs/Min 150 (1 UP), 300 (2 UP) # Max. Strokes/Min 150 Efficiency: Our Competence and experience in package design ensures optimum utilization of machine capacity to give highest possible output as well as minimum possible packaging material consumption. Performance: Simplicity of design with careful placement of various stations giving operator full vision and total control of all principal functions of machine that enhances performance. Reliability: Solid structure and sturdy components together with easy to set up and maintain mechanism ensures maximum availability. Quick and easy change over from one format to another improves productivity. About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/alu-alu-blister-packing-machine-manufacturer-india.php

ATF-I is designed to fill and seal aluminium / lami / plastic tubes at high speeds. The machine is suitable mainly for pharmaceutical, cosmetic and food industry. Machine can be used for filling of cream, ointment, gel, paste, balm and other similar viscous products by means of a volumetric dosing system. The machine is of fully enclosed construction with a rotary index table and single filling head. Machine is available in 3 configurations – # for aluminium tubes # for lami (laminated)/ plastic tubes # for alu + lami tubes The Technical Specs are as Follows: # Construction: Fully enclosed # Operation System Single Head, Rotary Index Table # Output 2400 tubes per hour for lami tubes; 3000 tubes per hour for alu tubes # Tube Diameter Minimum 12 mm to maximum 35 mm for alu, maximum 50 mm for lami # Tube Length Minimum 50 mm to maximum 220 mm # Tube Loading Automatic through a tube holding tray (also known as ‘ tube loading hopper ’ – to be manually loaded) # Tube Orientation Automatic, electronically controlled # Tube Cleaning By compressed air blow # Product Hopper S.S. 304, 50 liters capacity. {Water jacket with electrical heating and hot water circulation pump optional} # Product Agitator Slow speed agitator for stirring of product in hopper as an option # Filling Nozzle Fixed nozzle, with tube lifting at filling station – to lift up the tube so that nozzle gets inserted inside tube while filling. {Diving nozzle optional}. NO−TUBE−NO−FILL system incorporated. # Tail Cutting By suck-back method (to prevent dripping after filling operation) # Dozing Range a) 3 to 30 ml, b) 30 to 100 ml, c) 100 to 250 ml # Tube Sealing By hot air tool for plastic and lami tubes; By double fold and crimping tool for aluminium tubes # Batch Code Embossing In sealing jaws for plastic / lami tubes and in crimping jaws for alu tubes # Trim Waste Collected in a container on machine # Tube Ejection Automatic, through a discharge chute for collection About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/automatic-tube-filling-machine-manufacturer-india.php

SATF is designed to fill and seal aluminium / plastic / lami tubes. The machine is suitable mainly for pharmaceutical, cosmetic and food industry. Machine can be used for filling of cream, ointment, gel, paste, balm and other similar viscous products by means of a volumetric dosing system. Machine available in two configurations: # for aluminium tubes # for lami (laminated)/ plastic tubes The Technical Specs are as Follows: # Construction: Partially enclosed # Operation System Single Head, Rotary Index Table # Output Upto 1800 tubes per hour for alu tubes; 2400 tubes per hour for lami and plastic tubes # Products Handled Cream, ointment, gel, paste, balm and other similar viscous products # Tube Diameter Minimum 12 mm to maximum 50 mm # Tube Length Minimum 50 mm to maximum 220 mm # Tube Loading To be performed Manulally # Tube Orientation To be performed Manulally # Feeding Hopper S.S. 304, 50 liters capacity. {Water jacket with ele heating and hot water circulation pump optional} # Product Agitator Slow speed agitator for stirring of product in hopper as an option # Filling Nozzle Fixed nozzle, with tube lifting at filling station – to lift up the tube so that nozzle gets inserted inside tube while filling. {Diving nozzle optional}. NO−TUBE−NO−FILL system incorporated. # Tail Cutting By suck-back method (to prevent dripping after filling operation) # Dozing Range a) 3 to 30 ml, b) 30 to 100 ml, c) 100 to 250 ml # Tube Sealing By hot air tool for plastic and lami tubes; By double fold and crimping tool for aluminium tubes # Batch Code Embossing In sealing jaws for plastic / lami tubes and in crimping jaws for alu tubes # Tube Ejection Automatic, through a discharge chute for collection About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/semi-automatic-tube-filling-machine.php