AUTOMATIC BLISTER PACKING MACHINE BLISTRIP-II
1.0 GENERAL WORKING PRINCIPLE.
BLISTRIP - II is an automatic blister packing machine mainly utilised for packing of smaller and regular shaped solid articles such as pharmaceutical tablets, capsules, dragees etc., in blister packs. The Blister Forming, Product Feeding and Sealing operations are continuous by rotary motion while the indexing and punching operations are of intermittent reciprocating motion.
The output capacity of the machine depends on the product characteristics and thus on the type of feeding device. In case of slightly curved or flat tablets upto 10mm dia an output of 300 packs per minute for BLISTRIP - II can be optimally achieved.
The packing materials namely PVC film and the lidding material namely Aluminum foil (or Glassine Paper foil) with heat sealable VMCH lacquer are required for blister packing and are drawn off from reel stock. The blister packs which are punched out from main web can either be collected in bins or transferred over a conveyor belt for further handling. The trim waste is sheared off in small pieces to allow easy disposal.
2.0 STANDARD ACCESSORIES AND MOUNTINGS.
2.0.1 AC Variable Speed Drive.
2.0.2 Built-in Control Panel
2.0.3 Rotary Contact Heating System for PVC film.
2.0.4 Foil and Film Reel Holders.
2.0.5 Thermoforming Station with Vacuum Pump.
2.0.6 Vibratory Feeder.
2.0.7 Pressure Sealing Roller Assembly with Checkered Engraved Pattern.
(For sealing of continuously printed Alu. Foil).
2.0.8 Flexographic Over Printing Unit.
2.0.9 Web Indexing Mechanism (ratchet type).
2.0.10 Pack Punching Station.
2.0.11 One Set of STANDARD CHANGE-OVER PARTS - as listed in point 2.1 below.
(To suit any one product in one configuration).
2.1 SET OF STANDARD CHANGE-OVER PARTS.
2.1.1 Blister Forming Roller.
2.1.2 Counter Sealing Roller.
2.1.3 Inclined Feed Channel.
2.1.4 Guide Track.
2.1.5 Cutting Punch.
2.2 OPTIONAL CHANGE PARTS.
2.2.1 Scoring Unit. (To be fitted on Guide Track)
2.2.2 Spare Stereo Drum of Over Printing Unit.
2.2.3 Embossing in Cutting Punch.
2.2.4 Perforation in Cutting Punch.
3.0 SPECIAL ACCESSORIES AND MOUNTINGS
3.0.1 Photo Optical Print Image Control. (Print Registration Control)
3.0.2 Camera Inspection and Rejection System
3.0.3 Additional punching station on machine for separate embossing / perforation
3.0.4 PLC control of machine with touchscreen HMI
3.1 SPECIAL CHANGE-OVER PARTS.
3.1.1 Pressure Sealing Roller Assembly for print resistered sealing (if opted for feature 3.0.1)
3.1.2 Embossing / Perforation Tool for additional punching station (if opted for feature 3.0.3)
Keywords
2.1 SET
One Set
4 Foil
PVC film
main web
300 packs
trim waste
reel stock
Guide Track
one product
Vacuum Pump
ratchet type
flat tablets
small pieces
easy disposal
conveyor belt
Aluminum foil
blister packs
rotary motion
Control Panel
feeding device
output capacity
touchscreen HMI
Product Feeding
STANDARD CHANGE
lidding material
Perforation Tool
Rejection System
one configuration
packing materials
Film Reel Holders
Sealing operations
Over Printing Unit
2.2.1 Scoring Unit
punching operations
2.1.5 Cutting Punch
6 Vibratory Feeder
Inclined Feed Channel
0.2 Camera Inspection
Counter Sealing Roller
or Glassine Paper foil
product characteristics
3.1 SPECIAL CHANGE-OVER
3.0 SPECIAL ACCESSORIES
2.0 STANDARD ACCESSORIES
2.2.2 Spare Stereo Drum
print resistered sealing
2.2 OPTIONAL CHANGE PARTS
9 Web Indexing Mechanism
Checkered Engraved Pattern
Print Registration Control
heat sealable VMCH lacquer
2.0.10 Pack Punching Station
2.0.5 Thermoforming Station
1.0 GENERAL WORKING PRINCIPLE
2.1.1 Blister Forming Roller
regular shaped solid articles
3 Additional punching station
2.0.1 AC Variable Speed Drive
intermittent reciprocating motion
automatic blister packing machine
Photo Optical Print Image Control
2.0.3 Rotary Contact Heating System
2.0.7 Pressure Sealing Roller Assembly
AUTOMATIC BLISTER PACKING MACHINE BLISTRIP
separate embossing / perforation 3.0.4 PLC control
