FILLTUBE Machines are designed to fill and seal plastic, laminated and aluminium tubes at high speeds. These machines are specially suitable for pharmaceutical, cosmetic and food industries. FILLTUBE machines are used mainly for filling of cream, ointment, get, paste, balm and other similar viscous products by means of volumetric dosing system. These machines are designed and manufactured to suit GMP requirements, all contact parts are stainless steel, well-polished and mirror buffed. These machines are produced from tested and reliable materials for long service life. Some of the Important Features include: # Enclosed machine - acrylic doors on all four sides above main frame # Tail cutting by ‘suck back’ Method # Step-less adjustments of filling volume # Adjustable anti-vibration legs # Step-less adjustments of filling volume # Contact less heating of lami / plastic tube by Leister make* hot air tool # Fill accuracy better than ± 1% # No tube no fill safety system # Safety interlock for acrylic doors # Low air pressure switch # Low heating temperature interlock # Control sensor for non-ejected tubes* # Emergency stop Optional Features include: # Jacketed hopper with electrical heater for water heating and hot water circulation pump # Slow speed agitator # Tube cleaning by air blow or suction* # Nitrogen flushing arrangement # Batch number and date embossing on crimp # Automatic hopper top up system # PLC control of machine The machine is of fully enclosed construction with a rotary index table and single filling head. Machine is available in 3 configurations – # for aluminium tubes # for lami (laminated)/ plastic tubes # for alu + lami tubes Specifications: Model FILLTUBE – 60 FILLTUBE - 120 Types of Tubes Laminated / Plastic & Aluminium Laminated & Plastic Tube Diameters 12mm to 40mm 16mm to 25mm Tube Lengths 50mm to 180mm 50mm to 180mm Fill Volumes 10ml to 170ml 10ml to 60ml Fill Weights (Ointments) 5gms to 150 gms 5gms to 150 gms Max. Output (Per Min) 60 Tubes 120 Tubes Special Models: Semi-Automatic Models, Models with large filling volumes (Up to 350ml) and large tube diameters (up to 60mm), models for cyanoacrylate filling with peristaltic pump for filling are also available. Details can be shared on request.

BLISTPOP is a simple de-blistering machine which is used to recover tablets / capsules / dragees from damaged or incomplete blister packs. A damaged or incomplete pack is inserted between two guides and pushed manually inside. Three adjustable wheels grips and draws the pack under a rubberized roller. The rubber roller presses down on the blister cavities-pushing out the product. The machine is adjustable to suit most pack sizes. The machine is suitable to open aluminum foil as well as glassine foil. Opened product is collected in a box and packaging material is collected at the back. The machine is universal type and does not need any change- over parts. By proper adjustments of wheels, guides and pressure of rubber roller a high rate of recovery can be achieved. Machine is constructed from stainless steel and is mounted on castor wheels.

BLISTPOP is a simple de-blistering machine which is used to recover tablets / capsules / dragees from damaged or incomplete blister packs. A damaged or incomplete pack is inserted between two guides and pushed manually inside. Three adjustable wheels grips and draws the pack under a rubberized roller. The rubber roller presses down on the blister cavities-pushing out the product. The machine is adjustable to suit most pack sizes. The machine is suitable to open aluminum foil as well as glassine foil. Opened product is collected in a box and packaging material is collected at the back. The machine is universal type and does not need any change- over parts. By proper adjustments of wheels, guides and pressure of rubber roller a high rate of recovery can be achieved. Machine is constructed from stainless steel and is mounted on castor wheels. About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/de-blistering-machine-blistpop.php

ATF-I is designed to fill and seal aluminium / lami / plastic tubes at high speeds. The machine is suitable mainly for pharmaceutical, cosmetic and food industry. Machine can be used for filling of cream, ointment, gel, paste, balm and other similar viscous products by means of a volumetric dosing system. The machine is of fully enclosed construction with a rotary index table and single filling head. Machine is available in 3 configurations – # for aluminium tubes # for lami (laminated)/ plastic tubes # for alu + lami tubes The Technical Specs are as Follows: # Construction: Fully enclosed # Operation System Single Head, Rotary Index Table # Output 2400 tubes per hour for lami tubes; 3000 tubes per hour for alu tubes # Tube Diameter Minimum 12 mm to maximum 35 mm for alu, maximum 50 mm for lami # Tube Length Minimum 50 mm to maximum 220 mm # Tube Loading Automatic through a tube holding tray (also known as ‘ tube loading hopper ’ – to be manually loaded) # Tube Orientation Automatic, electronically controlled # Tube Cleaning By compressed air blow # Product Hopper S.S. 304, 50 liters capacity. {Water jacket with electrical heating and hot water circulation pump optional} # Product Agitator Slow speed agitator for stirring of product in hopper as an option # Filling Nozzle Fixed nozzle, with tube lifting at filling station – to lift up the tube so that nozzle gets inserted inside tube while filling. {Diving nozzle optional}. NO−TUBE−NO−FILL system incorporated. # Tail Cutting By suck-back method (to prevent dripping after filling operation) # Dozing Range a) 3 to 30 ml, b) 30 to 100 ml, c) 100 to 250 ml # Tube Sealing By hot air tool for plastic and lami tubes; By double fold and crimping tool for aluminium tubes # Batch Code Embossing In sealing jaws for plastic / lami tubes and in crimping jaws for alu tubes # Trim Waste Collected in a container on machine # Tube Ejection Automatic, through a discharge chute for collection About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/automatic-tube-filling-machine-manufacturer-india.php

SATF is designed to fill and seal aluminium / plastic / lami tubes. The machine is suitable mainly for pharmaceutical, cosmetic and food industry. Machine can be used for filling of cream, ointment, gel, paste, balm and other similar viscous products by means of a volumetric dosing system. Machine available in two configurations: # for aluminium tubes # for lami (laminated)/ plastic tubes The Technical Specs are as Follows: # Construction: Partially enclosed # Operation System Single Head, Rotary Index Table # Output Upto 1800 tubes per hour for alu tubes; 2400 tubes per hour for lami and plastic tubes # Products Handled Cream, ointment, gel, paste, balm and other similar viscous products # Tube Diameter Minimum 12 mm to maximum 50 mm # Tube Length Minimum 50 mm to maximum 220 mm # Tube Loading To be performed Manulally # Tube Orientation To be performed Manulally # Feeding Hopper S.S. 304, 50 liters capacity. {Water jacket with ele heating and hot water circulation pump optional} # Product Agitator Slow speed agitator for stirring of product in hopper as an option # Filling Nozzle Fixed nozzle, with tube lifting at filling station – to lift up the tube so that nozzle gets inserted inside tube while filling. {Diving nozzle optional}. NO−TUBE−NO−FILL system incorporated. # Tail Cutting By suck-back method (to prevent dripping after filling operation) # Dozing Range a) 3 to 30 ml, b) 30 to 100 ml, c) 100 to 250 ml # Tube Sealing By hot air tool for plastic and lami tubes; By double fold and crimping tool for aluminium tubes # Batch Code Embossing In sealing jaws for plastic / lami tubes and in crimping jaws for alu tubes # Tube Ejection Automatic, through a discharge chute for collection About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/semi-automatic-tube-filling-machine.php