FILLTUBE Machines are designed to fill and seal plastic, laminated and aluminium tubes at high speeds. These machines are specially suitable for pharmaceutical, cosmetic and food industries. FILLTUBE machines are used mainly for filling of cream, ointment, get, paste, balm and other similar viscous products by means of volumetric dosing system. These machines are designed and manufactured to suit GMP requirements, all contact parts are stainless steel, well-polished and mirror buffed. These machines are produced from tested and reliable materials for long service life. Some of the Important Features include: # Enclosed machine - acrylic doors on all four sides above main frame # Tail cutting by ‘suck back’ Method # Step-less adjustments of filling volume # Adjustable anti-vibration legs # Step-less adjustments of filling volume # Contact less heating of lami / plastic tube by Leister make* hot air tool # Fill accuracy better than ± 1% # No tube no fill safety system # Safety interlock for acrylic doors # Low air pressure switch # Low heating temperature interlock # Control sensor for non-ejected tubes* # Emergency stop Optional Features include: # Jacketed hopper with electrical heater for water heating and hot water circulation pump # Slow speed agitator # Tube cleaning by air blow or suction* # Nitrogen flushing arrangement # Batch number and date embossing on crimp # Automatic hopper top up system # PLC control of machine The machine is of fully enclosed construction with a rotary index table and single filling head. Machine is available in 3 configurations – # for aluminium tubes # for lami (laminated)/ plastic tubes # for alu + lami tubes Specifications: Model FILLTUBE – 60 FILLTUBE - 120 Types of Tubes Laminated / Plastic & Aluminium Laminated & Plastic Tube Diameters 12mm to 40mm 16mm to 25mm Tube Lengths 50mm to 180mm 50mm to 180mm Fill Volumes 10ml to 170ml 10ml to 60ml Fill Weights (Ointments) 5gms to 150 gms 5gms to 150 gms Max. Output (Per Min) 60 Tubes 120 Tubes Special Models: Semi-Automatic Models, Models with large filling volumes (Up to 350ml) and large tube diameters (up to 60mm), models for cyanoacrylate filling with peristaltic pump for filling are also available. Details can be shared on request.

ATF-I is designed to fill and seal aluminium / lami / plastic tubes at high speeds. The machine is suitable mainly for pharmaceutical, cosmetic and food industry. Machine can be used for filling of cream, ointment, gel, paste, balm and other similar viscous products by means of a volumetric dosing system. The machine is of fully enclosed construction with a rotary index table and single filling head. Machine is available in 3 configurations – # for aluminium tubes # for lami (laminated)/ plastic tubes # for alu + lami tubes The Technical Specs are as Follows: # Construction: Fully enclosed # Operation System Single Head, Rotary Index Table # Output 2400 tubes per hour for lami tubes; 3000 tubes per hour for alu tubes # Tube Diameter Minimum 12 mm to maximum 35 mm for alu, maximum 50 mm for lami # Tube Length Minimum 50 mm to maximum 220 mm # Tube Loading Automatic through a tube holding tray (also known as ‘ tube loading hopper ’ – to be manually loaded) # Tube Orientation Automatic, electronically controlled # Tube Cleaning By compressed air blow # Product Hopper S.S. 304, 50 liters capacity. {Water jacket with electrical heating and hot water circulation pump optional} # Product Agitator Slow speed agitator for stirring of product in hopper as an option # Filling Nozzle Fixed nozzle, with tube lifting at filling station – to lift up the tube so that nozzle gets inserted inside tube while filling. {Diving nozzle optional}. NO−TUBE−NO−FILL system incorporated. # Tail Cutting By suck-back method (to prevent dripping after filling operation) # Dozing Range a) 3 to 30 ml, b) 30 to 100 ml, c) 100 to 250 ml # Tube Sealing By hot air tool for plastic and lami tubes; By double fold and crimping tool for aluminium tubes # Batch Code Embossing In sealing jaws for plastic / lami tubes and in crimping jaws for alu tubes # Trim Waste Collected in a container on machine # Tube Ejection Automatic, through a discharge chute for collection About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/automatic-tube-filling-machine-manufacturer-india.php

SATF is designed to fill and seal aluminium / plastic / lami tubes. The machine is suitable mainly for pharmaceutical, cosmetic and food industry. Machine can be used for filling of cream, ointment, gel, paste, balm and other similar viscous products by means of a volumetric dosing system. Machine available in two configurations: # for aluminium tubes # for lami (laminated)/ plastic tubes The Technical Specs are as Follows: # Construction: Partially enclosed # Operation System Single Head, Rotary Index Table # Output Upto 1800 tubes per hour for alu tubes; 2400 tubes per hour for lami and plastic tubes # Products Handled Cream, ointment, gel, paste, balm and other similar viscous products # Tube Diameter Minimum 12 mm to maximum 50 mm # Tube Length Minimum 50 mm to maximum 220 mm # Tube Loading To be performed Manulally # Tube Orientation To be performed Manulally # Feeding Hopper S.S. 304, 50 liters capacity. {Water jacket with ele heating and hot water circulation pump optional} # Product Agitator Slow speed agitator for stirring of product in hopper as an option # Filling Nozzle Fixed nozzle, with tube lifting at filling station – to lift up the tube so that nozzle gets inserted inside tube while filling. {Diving nozzle optional}. NO−TUBE−NO−FILL system incorporated. # Tail Cutting By suck-back method (to prevent dripping after filling operation) # Dozing Range a) 3 to 30 ml, b) 30 to 100 ml, c) 100 to 250 ml # Tube Sealing By hot air tool for plastic and lami tubes; By double fold and crimping tool for aluminium tubes # Batch Code Embossing In sealing jaws for plastic / lami tubes and in crimping jaws for alu tubes # Tube Ejection Automatic, through a discharge chute for collection About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/semi-automatic-tube-filling-machine.php

Capsule polishing cum Sorting Machine is used in connection with the ENSULE or SACF series of Capsule Filling machines. The components used in capsule polishing machine are made of high grade steel. Main chamber of the system is made of quality approved stainless steel covered with nylon net. The capsules are inserted into the polishing chamber of the unit through feed hopper. The feed capsules are rubbed inside the polished chamber of the machine to remove the dust deposits. Key Features: # Polishing chamber of the unit is attached with the dust collector to collect the dust particles of the feed capsules # Technical Specifications: Specific provision for compressed air to clean nylon brush # Easy to dismantle or clean or segregate # Low space utilization Technical Specifications: # Model: CPM - 100 # Capacity: 120,000 capsules per hour # Motor Rating: 0.18 KW # Weight: 50 kg (approx) # Dimensions: 1000 x 700 x 95 About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/capsule-polishing-and-sorting-machine.php

RMG (RAPID MIXER GRANULATOR): The Rapid Mixer Granulator is designed to suit the requirements of Pharmaceutical and Chemical Industry. As the name suggests, this machine performs two operations - mixing and granulating. After mixing of dry powders or granules, subsequent wet granulation occurs producing loose granules, thus avoiding transfer of dry mixture. The mixing is achieved by paddle type impeller blades spinning close to bottom of the mixing bowl. The impeller blades are angled in a way that sets the entire mixture in a whirling - rising - tumbling motion ensuring a quick and even distribution of all dry components which leads to an even wetting of every granule. Dome shaped mixing bowl directs loose particles into whirling motion with help of impeller for efficient mixing. The large lumps formed during wet mixing are broken up by chopping tool rotating at 1440/2880 RPM. Specially designed chopper blades driven at high speed for fast and uniform granulation throughout the whole mass in mixing bowl. The mix can be discharged with the impeller running through outlet located on the side of the mixing bowl near its bottom. The mixing tool is easily removed from the drive shaft to facilitate easy cleaning of mixing bowl. The side discharge assembly is hinged for accessibility for cleaning. The machine offers following advantages: # Contact parts can be of SS 304/316 grade. # Control panel with display and timer. # All MS parts of machine are cladded / covered with SS sheets. # All components easily accessible for easy cleaning. # All electrical &pneumatic parts are prewired to simplify installation. # Limit switch provided on main lid for safe operation. # Discharge can be provided on either side to suit clients requirement. About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/rapid-mixer-granulator.php

FBD (FLUID BED DRYER) Salient Features: # Better productivity and lesser drying time. # Less handing, more hygienic. # Uniform drying at low temperature. # Pneumatic sealing for higher capacity models. # Static grounders to eliminate electro-static charge # Product container with tilting arrangement. # Flame proof models also available. # Models available from 2 Kg. To 300 Kg Description: A Fluid Bed Dryer with latest improvement in design make this unit a truly versatile one for pharmaceutical, food, dyestuff, chemical and polymer industries. All contact parts are made out of S.S.304/316 and are provided with isolated control panel. Operation: Due to induced draft created by specially designed heavy duty fan the atmospheric air is drawn through the 5 micron air filter. The filtered air is then to the required temperature by electric heaters / steam radiator. The hot air passes through the product container and the product gets dried by Air fluidisation and the air control circulation by damper. The filter bag prevents fine particles from carrying over to exhaust air steam. Selection: Selection of capacity of fluid bed dryer depends upon bulk density, drying temperature and moisture contents of wet material to be dried. In case of 120 kg model a batch of 145 kg wet material can be loaded provided the bulk density of the material is 0.6kg/lit. (approx) Optional: # Digital temperature controller cum indicator for steam operated dryer. # Pneumatic bag shaking device. # Intrinsically safe earthing system. # Bottom & rear chambers made our of S.S.-304 quality # Flame proof Motor with push button station. # Available in GMP / S.S. Models About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/fluid-bed-dryer-manufacturer-india.php

COLLOID MILL: Homogenizing, emulsifying, dispersing, mixing, extracting etc., catering to the needs of several industries; such as # Pharmaceutical Industry # Food, Dairy, Confectionery Industry # Chemical Industry # Paint Industry # Textile Industry # Cosmetic And Detergent Industry # Rubber Industry # Starch Industry # Paper Industry The product is subjected to high shearing, cutting, and rubbing forces between two toothed surfaces. The product, while passing down the hopper, initially gets sized in the preliminary breaking drum where it is broken and thrown into the first stator tooth stage. Due to conical arrangement and the centrifugal effect of the rotor rotating at a speed of 2800 r.p.m., the material is forced into second tooth stage. The tooth design of the grinding set causes powerful transients that subject the particle with high forces, Intensity of which increases as product reaches the lowest grinding stage. The ground material continuously leaves the mill through the outlet pipe and if required, can be recirculated. Outstanding and rigid design and construction combined with excellent quality of workmanship ensures superior end product, suitable for continuous operation over long periods of time. About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/colloid-mill.php

BLISTRIP–Ixt is a single track automatic blister packing machine for packing of tablets, capsules, dragees etc., in blister packs using PVC-Alu packaging materials. The Blister Forming, Product Feeding and Sealing operations are continuous by rotary motion while the indexing and punching operations are of intermittent reciprocating motion.The output capacity of the machine depends on the product characteristics. In case of slightly curved or flat tablets up to 10mm dia an output of 150 packs per minute can be optimally achieved. Features: # Combi packs possible for better utilization of capacity and packaging materials # Edge – to – edge cutting to eliminate trim waste between packs # Special tool design reduces trim waste # Continuous blister forming at low temperature by contact heating system # All change over parts and adjustments accessible from front side # Easy and quick change over reduces material wastage and down time # Simpler operation reduces operator fatigue – increases output # Very compact in size Specifications: # Max. Web Width 148 mm # Max. Forming depth 10 mm (Expandable up to 20) # Max. output: Packs/Min 150 (1 UP), 300 (2 UP) # Max. Strokes/Min 150 Efficiency: Our Competence and experience in package design ensures optimum utilization of machine capacity to give highest possible output as well as minimum possible packaging material consumption. Performance: Simplicity of design with careful placement of various stations giving operator full vision and total control of all principal functions of machine that enhances performance. Reliability: Solid structure and sturdy components together with easy to set up and maintain mechanism ensures maximum availability. Quick and easy change over from one format to another improves productivity.

BLISTRIP–II is a high speed automatic blister packing machine for packing of smaller and regular shaped solid articles such as pharmaceutical tablets, capsules, dragees etc., in blister packs using PVC-Alu packaging materials. The Blister Forming, Product Feeding and Sealing operations are continuous by rotary motion while the indexing and punching operations are of intermittent reciprocating motion. The output capacity of the machine depends on the product characteristics. In case of slightly curved or flat tablets up to 10mm dia an output of 300 packs per minute can be optimally achieved. Features: # High speed, High production, Cost effective # Machine with the highest output – to – investment ratio # Lowest cost per pack # Combi packs possible for better utilization of capacity and packaging materials # Edge – to – edge cutting to eliminate trim waste between packs # Special tool design reduces trim waste # Continuous blister forming at low temperature by contact heating system # All change over parts and adjustments accessible from front side # In-built water chiller available # Easy and quick change over reduces material wastage and down time # Simpler operation reduces operator fatigue – increases output # Extended guide track can accommodate up to four feeders to produce multi-product kit packs # High strokes rate gives you high outputs for all sizes of blisters Specifications: # Max. Web Width 210 mm # Max. Forming depth 10 mm (Expandable up to 20) # Max. output: Packs/Min 300 (2 UP), 450 (3 UP) # Max. Strokes/Min 150 Efficiency: Our Competence and experience in package design ensures optimum utilization of machine capacity to give highest possible output as well as minimum possible packaging material consumption. Performance: Simplicity of design with careful placement of various stations giving operator full vision and total control of all principal functions of machine that enhances performance. Reliability: Solid structure and sturdy components together with easy to set up and maintain mechanism ensures maximum availability. Quick and easy change over from one format to another improves productivity. Flexibility: The machine can handle wide range of forming and lidding materials, can be equipped with various types of feeding systems to handle most types and shapes of pharmaceutical tablets, hard capsules, soft capsules, pills as well as some irregular shaped objects in any presentation.