AUTOMATIC BLISTER PACKING MACHINE BLISTRIP-II
BLISTRIP - II is an automatic blister packing machine mainly utilized for packing of smaller and regular shaped solid articles such as pharmaceutical tablets, capsules, dragees etc., in blister packs. The Blister Forming, Product Feeding and Sealing operations are continuous by rotary motion while the indexing and punching operations are of intermittent reciprocating motion.
The output capacity of the machine depends on the product characteristics and thus on the type of feeding device. In case of slightly curved or flat tablets upto 10mm dia an output of 300 packs per minute for BLISTRIP - II can be optimally achieved.
The packing materials namely PVC film and the lidding material namely Aluminum foil (or Glassine Paper foil) with heat sealable VMCH lacquer are required for blister packing and are drawn off from reel stock. The blister packs which are punched out from main web can either be collected in bins or transferred over a conveyor belt for further handling. The trim waste is sheared off in small pieces to allow easy disposal.
2.0 STANDARD ACCESSORIES AND MOUNTINGS.
2.0.1 AC Variable Speed Drive.
2.0.2 Built-in Control Panel
2.0.3 Rotary Contact Heating System for PVC film.
2.0.4 Foil and Film Reel Holders.
2.0.5 Thermoforming Station with Vacuum Pump.
2.0.6 Vibratory Feeder.
2.0.7 Pressure Sealing Roller Assembly with Checkered Engraved Pattern.
(For sealing of continuously printed Alu. Foil).
2.0.8 Flexographic Over Printing Unit.
2.0.9 Web Indexing Mechanism (ratchet type).
2.0.10 Pack Punching Station.
2.0.11 One Set of STANDARD CHANGE-OVER PARTS - as listed in point 2.1 below.
(To suit any one product in one configuration).
2.1 SET OF STANDARD CHANGE-OVER PARTS.
2.1.1 Blister Forming Roller.
2.1.2 Counter Sealing Roller.
2.1.3 Inclined Feed Channel.
2.1.4 Guide Track.
2.1.5 Cutting Punch.
2.2 OPTIONAL CHANGE PARTS.
2.2.1 Scoring Unit. (To be fitted on Guide Track)
2.2.2 Spare Stereo Drum of Over Printing Unit.
2.2.3 Embossing in Cutting Punch.
2.2.4 Perforation in Cutting Punch.
3.0 SPECIAL ACCESSORIES AND MOUNTINGS
3.0.1 Photo Optical Print Image Control. (Print Registration Control)
3.0.2 Camera Inspection and Rejection System
3.0.3 Additional punching station on machine for separate embossing / perforation
3.0.4 PLC control of machine with touchscreen HMI
3.1 SPECIAL CHANGE-OVER PARTS.
3.1.1 Pressure Sealing Roller Assembly for print registered sealing (if opted for feature 3.0.1)
3.1.2 Embossing / Perforation Tool for additional punching station (if opted for feature 3.0.3)
Keywords
II
bins
case
2.1.2
point
PARTS.
minute
curved
One Set
smaller
feature
dragees
handling
10mm dia
capsules
PVC film
main web
300 packs
reel stock
MOUNTINGS.
trim waste
Vacuum Pump
one product
Guide Track
small pieces
flat tablets
ratchet type
Aluminum foil
rotary motion
easy disposal
conveyor belt
blister packs
Control Panel
pharmaceutical
feeding device
touchscreen HMI
output capacity
Product Feeding
STANDARD CHANGE
lidding material
Perforation Tool
Rejection System
packing materials
one configuration
Film Reel Holders
Sealing operations
Over Printing Unit
punching operations
2.2.1 Scoring Unit
2.1.5 Cutting Punch
6 Vibratory Feeder
Inclined Feed Channel
Counter Sealing Roller
0.2 Camera Inspection
or Glassine Paper foil
product characteristics
3.1 SPECIAL CHANGE-OVER
2.2.2 Spare Stereo Drum
2.0 STANDARD ACCESSORIES
3.0 SPECIAL ACCESSORIES
2.2 OPTIONAL CHANGE PARTS
9 Web Indexing Mechanism
Checkered Engraved Pattern
Print Registration Control
heat sealable VMCH lacquer
2.0.10 Pack Punching Station
regular shaped solid articles
2.0.5 Thermoforming Station
2.1.1 Blister Forming Roller
3 Additional punching station
2.0.1 AC Variable Speed Drive
automatic blister packing machine
intermittent reciprocating motion
Photo Optical Print Image Control
2.0.3 Rotary Contact Heating System
2.0.7 Pressure Sealing Roller Assembly
AUTOMATIC BLISTER PACKING MACHINE BLISTRIP
separate embossing / perforation 3.0.4 PLC control
