AUTOMATIC TUBE FILLING MACHINE FILLTUBE−120 FI...

AUTOMATIC TUBE FILLING MACHINE FILLTUBE−120 FILLTUBE−120 is designed to fill and seal plastic and laminate tubes. The machine is suitable especially for pharmaceutical, cosmetic and foodstuff industry. Machine can be used for filling of cream, ointment, gel, paste, balm and other similar viscous products by means of a volumetric dosing system. The machine is designed and manufactured to suit FDA and cGMP requirements. All contact parts stainless steel, well-polished and mirror buffed. The machine produced from tested and reliable materials for long service life. To get accurate dozing, it would be preferable to use different syringes for different volumes. BASIC MACHINE INCLUDES: - Main machine frame with stainless steel covers - Acrylic doors to cover working area above main frame - Adjustable anti-vibration legs - AC inverter for main drive for step-less speed variation - Automatic tube hopper with pneumatic system of tube insertion into rotary index table - Rotary index table for transferring tubes to filling, closing stations and other sections - Tube orientation controlled by photocell for accurate positioning of tubes - 50 litres capacity stainless steel hopper - Stainless steel volumetric dozing syringe and Teflon piston seals for accurate dosage with step-less adjustment of volume - Tube lifting at filling station – so that filling nozzle gets inserted inside tube during filling - Tail cutting by 'suck back' method to prevent dripping of product after filling - Hot air tool for plastic / laminated tubes (Leister make heater) - PID temperature controller for accurate control of hot air temperature - Air supply to air heater through independent blower - Trimming of plastic / lami tubes at the top end - Automatic tube ejection - Preset counter SAFETY FEATURES: • No−Tube−No−Fill system • Safety interlock for machine doors • Low air pressure switch • Low temperature interlock • Emergency stop • Control sensor for non ejected tubes OPTIONALS: • Jacketed hopper with electrical heater for water heating and hot water circulation pump • Slow speed agitator • Embossing feature for lami tubes along with set of negatively etched character metallic stereos • Water chiller (1 ton) • Automatic hopper top-up system using ultrasonic level sensors and metering pump TECHNICAL SPECIFICATIONS: CONSTRUCTION Fully enclosed OPERATION SYSTEM Double Head, Rotary Index Table MAXIMUM OUTPUT 7000 tubes per hour for lami tubes PRODUCT HANDLED Cream, ointment, gel, paste, balm and other similar viscous products. TUBE DIAMETER Minimum 12 mm to maximum 25 mm TUBE LENGTH Minimum 50 mm to maximum 180 mm TUBE LOADING Automatic through a tube holding tray TUBE ORIENTATION Automatic, electronically controlled PRODUCT HOPPER 50 liters capacity. {Option for water jacket with electrical heating} PRODUCT AGITATOR Slow speed agitator for stirring of product in hopper as an option FILLING NOZZLE Fixed nozzle, with tube lifting at filling station NO−TUBE−NO−FILL system incorporated. TAIL CUTTING By suck-back method (to prevent dripping after filling operation) DOZING RANGE a) 5 to 30 ml b) 30 to 55 ml TUBE SEALING By hot air tool for plastic and lami tubes BATCH CODE EMBOSSING In sealing jaws for plastic / lami tubes TRIM WASTE Collected in a container on machine TUBE EJECTION Automatic, through a discharge chute for collection CHANGE PARTS a) Tube Holding Cups (when tube dia changes) b) Tube Loading Shoe & Inserter Plug (when tube dia changes) c) Filling Nozzle (when fill volume or product viscosity changes) d) Filling Syringe (when fill volume changes) e) Hot Air Nozzle & Adaptor (when tube dia changes) POWER CONSUMPTION 5.0 kw for plastic / lami tubes (3 Phase + N + E) COMPRESSED AIR REQUIREMENT 400 litres per minute at 6 bar pressure (clean, dry, oil free) COLD WATER REQUIREMENT 2 litres per min at 2 bar pressure at 10º Cent MACHINE DIMENSIONS 1800 mm width X 1000 mm breadth X 2250 mm height (inclusive of tube loading tray, product hopper and agitator) MACHINE WEIGHT 800 kg

Keywords

Automatic Blister Packing Machine Manufacturer in Indore – Speed Meets Accuracy

Tube Filling Machine Manufacturer in Indore – Versatile Filling Solutions Across Industries

Automatic Tube Filling Machine Exporter – Global-Grade Equipment for High Output

Semi-Automatic Tube Filling Machine Manufacturer in Indore – Ideal for Flexible Operations

Chat with us on WhatsApp