Products

SACF I & SACF -II (Semi Automatic Capsule Filling Machines) are designed to fill hard gelatin capsules of all sizes with powders, pellets or granular materials. Depending upon the quality and size of capsules, ambient temperature and operator speed, the machine can give an output of up to 40,000 capsules per hour under optimum conditions. SACF -I and II are widely popular mainly because of the followings: # Low handling losses – the spilling and dusting of drugs negligible due to Surrounding trays and recovery of powder is almost total. # Versatile – fills capsules of all sizes # Twin loading heads for faster production rate # Compact & light weight filling rings # Short change-over time between different capsule sizes # Uniformity and accuracy of filling –fill weight is uniform and the dosage is accurately maintained within the prescribed limits # The built-in counter provides exact number of filled capsules # Simple operation and easy maintenance https://youtu.be/z0R7X3B_P6c

FILLTUBE Machines are designed to fill and seal plastic, laminated and aluminium tubes at high speeds. These machines are specially suitable for pharmaceutical, cosmetic and food industries. FILLTUBE machines are used mainly for filling of cream, ointment, get, paste, balm and other similar viscous products by means of volumetric dosing system. These machines are designed and manufactured to suit GMP requirements, all contact parts are stainless steel, well-polished and mirror buffed. These machines are produced from tested and reliable materials for long service life. Some of the Important Features include: # Enclosed machine - acrylic doors on all four sides above main frame # Tail cutting by ‘suck back’ Method # Step-less adjustments of filling volume # Adjustable anti-vibration legs # Step-less adjustments of filling volume # Contact less heating of lami / plastic tube by Leister make* hot air tool # Fill accuracy better than ± 1% # No tube no fill safety system # Safety interlock for acrylic doors # Low air pressure switch # Low heating temperature interlock # Control sensor for non-ejected tubes* # Emergency stop Optional Features include: # Jacketed hopper with electrical heater for water heating and hot water circulation pump # Slow speed agitator # Tube cleaning by air blow or suction* # Nitrogen flushing arrangement # Batch number and date embossing on crimp # Automatic hopper top up system # PLC control of machine The machine is of fully enclosed construction with a rotary index table and single filling head. Machine is available in 3 configurations – # for aluminium tubes # for lami (laminated)/ plastic tubes # for alu + lami tubes Specifications: Model FILLTUBE – 60 FILLTUBE - 120 Types of Tubes Laminated / Plastic & Aluminium Laminated & Plastic Tube Diameters 12mm to 40mm 16mm to 25mm Tube Lengths 50mm to 180mm 50mm to 180mm Fill Volumes 10ml to 170ml 10ml to 60ml Fill Weights (Ointments) 5gms to 150 gms 5gms to 150 gms Max. Output (Per Min) 60 Tubes 120 Tubes Special Models: Semi-Automatic Models, Models with large filling volumes (Up to 350ml) and large tube diameters (up to 60mm), models for cyanoacrylate filling with peristaltic pump for filling are also available. Details can be shared on request.

A simple and sturdy semi-automatic container filling machine for filling cream, paste, ointment, wax polish, grease, jam, sauce etc. in plastic or tin containers or jars, bottles etc. Containers like flat tins, bottles are to be manually placed under the filling nozzles. No-Container-No-Fill device will stop the machine if container is not in place. SS jacketed hopper with 2 kw heater and stirrer can be provided as an option to facilitate easy filling of highly viscous products. Filled containers are to be manually removed from machine and replaced with next empty container. Features : # Can fill creams of various viscosity # No – Container – No – Fill interlock # Tail Cutting arrangement after dozing # Easy change over from one size to another # Fill quantity can be accurately adjusted # Fill accuracy up to ±0.5% # Simple in operation and maintenance Compressed Air requirement: 2 CFM @ 6 bar Models Available: A. SACnF-1: # Dozer: Single Head # Filling Range: 5 to 500 ml # Output: 10 to 30 per min B. SACnF-2: # Dozer: Double Head # Filling Range: 5 to 500 ml # Output: 20 to 60 per min Note: # Fill Range with interchangeable Filling Syringe of different capacity # Output depends on fill quantity and material characteristics. About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/semi-automatic-container-filling-machine-for-creams-and-ointment.php

A simple and sturdy semi-automatic container filling machine for filling cream, paste, ointment, wax polish, grease, jam, sauce etc. in plastic or tin containers or jars, bottles etc. Containers like flat tins, bottles are to be manually placed under the filling nozzles. No-Container-No-Fill device will stop the machine if container is not in place. SS jacketed hopper with 2 kw heater and stirrer can be provided as an option to facilitate easy filling of highly viscous products. Filled containers are to be manually removed from machine and replaced with next empty container. Features : # Can fill creams of various viscosity # No – Container – No – Fill interlock # Tail Cutting arrangement after dozing # Easy change over from one size to another # Fill quantity can be accurately adjusted # Fill accuracy up to ±0.5% # Simple in operation and maintenance Compressed Air requirement: 2 CFM @ 6 bar Models Available: A. SACnF-1: # Dozer: Single Head # Filling Range: 5 to 500 ml # Output: 10 to 30 per min B. SACnF-2: # Dozer: Double Head # Filling Range: 5 to 500 ml # Output: 20 to 60 per min Note: # Fill Range with interchangeable Filling Syringe of different capacity # Output depends on fill quantity and material characteristics. About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/semi-automatic-container-filling-machine-for-creams-and-ointment.php

Capsule polishing cum Sorting Machine is used in connection with the ENSULE or SACF series of Capsule Filling machines. The components used in capsule polishing machine are made of high grade steel. Main chamber of the system is made of quality approved stainless steel covered with nylon net. The capsules are inserted into the polishing chamber of the unit through feed hopper. The feed capsules are rubbed inside the polished chamber of the machine to remove the dust deposits. Key Features: # Polishing chamber of the unit is attached with the dust collector to collect the dust particles of the feed capsules # Technical Specifications: Specific provision for compressed air to clean nylon brush # Easy to dismantle or clean or segregate # Low space utilization Technical Specifications: # Model: CPM - 100 # Capacity: 120,000 capsules per hour # Motor Rating: 0.18 KW # Weight: 50 kg (approx) # Dimensions: 1000 x 700 x 95 About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/capsule-polishing-and-sorting-machine.php

A simple and sturdy semi-automatic container filling machine for filling cream, paste, ointment, wax polish, grease, jam, sauce etc. in plastic or tin containers or jars, bottles etc. Containers like flat tins, bottles are to be manually placed under the filling nozzles. No-Container-No-Fill device will stop the machine if container is not in place. SS jacketed hopper with 2 kw heater and stirrer can be provided as an option to facilitate easy filling of highly viscous products. Filled containers are to be manually removed from machine and replaced with next empty container. Features : # Can fill creams of various viscosity # No – Container – No – Fill interlock # Tail Cutting arrangement after dozing # Easy change over from one size to another # Fill quantity can be accurately adjusted # Fill accuracy up to ±0.5% # Simple in operation and maintenance Compressed Air requirement: 2 CFM @ 6 bar Models Available: A. SACnF-1: # Dozer: Single Head # Filling Range: 5 to 500 ml # Output: 10 to 30 per min B. SACnF-2: # Dozer: Double Head # Filling Range: 5 to 500 ml # Output: 20 to 60 per min Note: # Fill Range with interchangeable Filling Syringe of different capacity # Output depends on fill quantity and material characteristics. About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/semi-automatic-container-filling-machine-for-creams-and-ointment.php

FBD (FLUID BED DRYER) Salient Features: # Better productivity and lesser drying time. # Less handing, more hygienic. # Uniform drying at low temperature. # Pneumatic sealing for higher capacity models. # Static grounders to eliminate electro-static charge # Product container with tilting arrangement. # Flame proof models also available. # Models available from 2 Kg. To 300 Kg Description: A Fluid Bed Dryer with latest improvement in design make this unit a truly versatile one for pharmaceutical, food, dyestuff, chemical and polymer industries. All contact parts are made out of S.S.304/316 and are provided with isolated control panel. Operation: Due to induced draft created by specially designed heavy duty fan the atmospheric air is drawn through the 5 micron air filter. The filtered air is then to the required temperature by electric heaters / steam radiator. The hot air passes through the product container and the product gets dried by Air fluidisation and the air control circulation by damper. The filter bag prevents fine particles from carrying over to exhaust air steam. Selection: Selection of capacity of fluid bed dryer depends upon bulk density, drying temperature and moisture contents of wet material to be dried. In case of 120 kg model a batch of 145 kg wet material can be loaded provided the bulk density of the material is 0.6kg/lit. (approx) Optional: # Digital temperature controller cum indicator for steam operated dryer. # Pneumatic bag shaking device. # Intrinsically safe earthing system. # Bottom & rear chambers made our of S.S.-304 quality # Flame proof Motor with push button station. # Available in GMP / S.S. Models About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/fluid-bed-dryer-manufacturer-india.php

FBD (FLUID BED DRYER) Salient Features: # Better productivity and lesser drying time. # Less handing, more hygienic. # Uniform drying at low temperature. # Pneumatic sealing for higher capacity models. # Static grounders to eliminate electro-static charge # Product container with tilting arrangement. # Flame proof models also available. # Models available from 2 Kg. To 300 Kg Description: A Fluid Bed Dryer with latest improvement in design make this unit a truly versatile one for pharmaceutical, food, dyestuff, chemical and polymer industries. All contact parts are made out of S.S.304/316 and are provided with isolated control panel. Operation: Due to induced draft created by specially designed heavy duty fan the atmospheric air is drawn through the 5 micron air filter. The filtered air is then to the required temperature by electric heaters / steam radiator. The hot air passes through the product container and the product gets dried by Air fluidisation and the air control circulation by damper. The filter bag prevents fine particles from carrying over to exhaust air steam. Selection: Selection of capacity of fluid bed dryer depends upon bulk density, drying temperature and moisture contents of wet material to be dried. In case of 120 kg model a batch of 145 kg wet material can be loaded provided the bulk density of the material is 0.6kg/lit. (approx) Optional: # Digital temperature controller cum indicator for steam operated dryer. # Pneumatic bag shaking device. # Intrinsically safe earthing system. # Bottom & rear chambers made our of S.S.-304 quality # Flame proof Motor with push button station. # Available in GMP / S.S. Models About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/fluid-bed-dryer-manufacturer-india.php

Automatic Ointment / Cream Manufacturing Plant is used to prepare medicated homogenised emulsion of Wax and Water to a particular formulation. It is useful for manufacturing of creams, ointments, pastes and gels for pharmaceutical and cosmetic industries. It consists of 3 vessels: a) Jacketed Water Phase Vessel of adequate capacity according to batch size of the product to heat the water to a specified temperature according to formulation. b) Jacketed Wax Phase Vessel to melt wax of required formulated quantity to specified temperature. c) Molten wax and hot water then transferred by Vacuum to Jacketed Main (Reactor) Vessel through filter and the pipe lines laid in the plant, Medicinal ingredients according to formula of the formulation added, then processed at constant temperature under 400 mm Vacuum with continuous stirring, homogenized till it becomes an emulsion with consistent viscosity. Heating can be Electrical / Steam / Thermic Fluid. Plant Capacities ranging from 50kg to 1000kg can be manufactured. All contact parts are made of superior quality SS 316 / SS 316 L grade stainless steel material, other non-contact parts are made out of SS 304 material. Jackets are made out of M.S., cladded with SS 304. This meets GMP standards. About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/ointment-manufacturing-plant-manufacturer-india.php

Auto coater is popularly used to coat tablets, pills, candies, granules, sweets with sugar film, an organic film, and aqueous coating in the Pharmaceutical and food industry. It is a high efficiency, energy-saving, safe and clean equipment for film & sugar coating of tablets, Pills, and candies with film – organic solvent and aqueous coating and film coating of tablets. The tablets to be coated are put into a continuous orbital motion the closed rotating Drum. The coating medium gets auto-sprayed during the process, while, the hot filtered air is supplied under negative pressure. The hot air penetrates through the core layers of the table and is discharged from the bottom of the layers. The coating medium sprayed on the surface of the tablet core will dry rapidly and evenly, forming a stable and smooth surface film on the tablet. About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/ointment-manufacturing-plant-manufacturer-india.php

Jicon manufactures and supplies Changeover Parts for not only our own make machines, but also for other popular brands. The machines includes Blister Packing Machines, Capsule Filling Machines, Tube Filling Machines, Cartoning Machines etc. Features: # High Precision, Accuracy and fineness of fitment # MOC as per cGMP standards and as recomended # Assurity of Performance # Test Certificates issued # Help provided in Validation # Aftersales Support About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries.

Auto coater is popularly used to coat tablets, pills, candies, granules, sweets with sugar film, an organic film, and aqueous coating in the Pharmaceutical and food industry. It is a high efficiency, energy-saving, safe and clean equipment for film & sugar coating of tablets, Pills, and candies with film – organic solvent and aqueous coating and film coating of tablets. The tablets to be coated are put into a continuous orbital motion the closed rotating Drum. The coating medium gets auto-sprayed during the process, while, the hot filtered air is supplied under negative pressure. The hot air penetrates through the core layers of the table and is discharged from the bottom of the layers. The coating medium sprayed on the surface of the tablet core will dry rapidly and evenly, forming a stable and smooth surface film on the tablet. About Jicon Technologies: Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries. https://jicon.com/ointment-manufacturing-plant-manufacturer-india.php