AUTOMATIC BLISTER PACKING MACHINE BLISTRIP-II
1.0 GENERAL WORKING PRINCIPLE.
BLISTRIP - II is an automatic blister packing machine mainly utilised for packing of smaller and regular shaped solid articles such as pharmaceutical tablets, capsules, dragees etc., in blister packs. The Blister Forming, Product Feeding and Sealing operations are continuous by rotary motion while the indexing and punching operations are of intermittent reciprocating motion.
The output capacity of the machine depends on the product characteristics and thus on the type of feeding device. In case of slightly curved or flat tablets upto 10mm dia an output of 300 packs per minute for BLISTRIP - II can be optimally achieved.
The packing materials namely PVC film and the lidding material namely Aluminum foil (or Glassine Paper foil) with heat sealable VMCH lacquer are required for blister packing and are drawn off from reel stock. The blister packs which are punched out from main web can either be collected in bins or transferred over a conveyor belt for further handling. The trim waste is sheared off in small pieces to allow easy disposal.
2.0 STANDARD ACCESSORIES AND MOUNTINGS.
2.0.1 AC Variable Speed Drive.
2.0.2 Built-in Control Panel
2.0.3 Rotary Contact Heating System for PVC film.
2.0.4 Foil and Film Reel Holders.
2.0.5 Thermoforming Station with Vacuum Pump.
2.0.6 Vibratory Feeder.
2.0.7 Pressure Sealing Roller Assembly with Checkered Engraved Pattern.
(For sealing of continuously printed Alu. Foil).
2.0.8 Flexographic Over Printing Unit.
2.0.9 Web Indexing Mechanism (ratchet type).
2.0.10 Pack Punching Station.
2.0.11 One Set of STANDARD CHANGE-OVER PARTS - as listed in point 2.1 below.
(To suit any one product in one configuration).
2.1 SET OF STANDARD CHANGE-OVER PARTS.
2.1.1 Blister Forming Roller.
2.1.2 Counter Sealing Roller.
2.1.3 Inclined Feed Channel.
2.1.4 Guide Track.
2.1.5 Cutting Punch.
2.2 OPTIONAL CHANGE PARTS.
2.2.1 Scoring Unit. (To be fitted on Guide Track)
2.2.2 Spare Stereo Drum of Over Printing Unit.
2.2.3 Embossing in Cutting Punch.
2.2.4 Perforation in Cutting Punch.
3.0 SPECIAL ACCESSORIES AND MOUNTINGS
3.0.1 Photo Optical Print Image Control. (Print Registration Control)
3.0.2 Camera Inspection and Rejection System
3.0.3 Additional punching station on machine for separate embossing / perforation
3.0.4 PLC control of machine with touchscreen HMI
3.1 SPECIAL CHANGE-OVER PARTS.
3.1.1 Pressure Sealing Roller Assembly for print resistered sealing (if opted for feature 3.0.1)
3.1.2 Embossing / Perforation Tool for additional punching station (if opted for feature 3.0.3)
TECHNICAL SPECIFICATIONS
BASE MATERIAL: MAX WIDTH:
(PVC / PVC-PVDC / PE-PVDC)
0.2 TO .3 THICK; IN REEL FORM MAX. 440. 210
LIDDING MATERIAL : MAX. WIDTH :
(HSL COATED HARD ALU / GLASSINE FOIL)
0.02 TO 0.04 THICK; IN REEL FORM MAX. 220. 206
MAX. PACK SIZE : (1 UP)
(2 UP)
(3 UP) 110 x 202
110 x 100
110 x 64
MIN. PACK SIZE : 25 x 45 (1 UP)
MAX. FORMING DEPTH: 10 mm (EXTENDABLE TO 20)
MAX. WEB SPEED : 5 METERS / MIN.
MAX. OUTPUT* : PACKS / MIN : 250 (2 UP)
350 (3 UP)
MAX. STROKES / MIN : 150
COMPRESSED AIR PRESSURE (BAR) 6
AIR CONSUMPTION (LIT / MIN) 350
ELECTRICAL POWER CONNECTION DETAILS : 440 V, 3PH, AC, +N, +EARTH (OTHER VOLTAGE ON REQUEST.)
POWER CONSUMPTION :
PEAK :
AVERAGE :
7.5 Kw
5 Kw
CHILLED WATER REQUIREMENT :
(18 TO 20 C) AT 3 BAR PRESSURE 120 LIT / HR.
Keywords
II
UP
1.3
HR.
206
3PH
LIT
PEAK
case
10mm
bins
10 mm
EARTH
440 V
2.1.2
point
PARTS.
minute
curved
7.5 Kw
PE-PVDC
3 THICK
feature
One Set
VOLTAGE
REQUEST
dragees
2.1 SET
smaller
AVERAGE
main web
4 Foil
PVC film
handling
5 METERS
capsules
MAX WIDTH
300 packs
REEL FORM
0.04 THICK
trim waste
MOUNTINGS.
MAX. WIDTH
reel stock
Guide Track
one product
Vacuum Pump
small pieces
MAX. STROKES
flat tablets
ratchet type
BASE MATERIAL
easy disposal
conveyor belt
Aluminum foil
Control Panel
rotary motion
blister packs
GLASSINE FOIL
feeding device
MAX. WEB SPEED
MAX. PACK SIZE
pharmaceutical
MIN. PACK SIZE
3 BAR PRESSURE
Product Feeding
STANDARD CHANGE
AIR CONSUMPTION
output capacity
touchscreen HMI
lidding material
Perforation Tool
Rejection System
one configuration
POWER CONSUMPTION
Film Reel Holders
packing materials
Sealing operations
Over Printing Unit
MAX. FORMING DEPTH
2.2.1 Scoring Unit
HSL COATED HARD ALU
punching operations
6 Vibratory Feeder
2.1.5 Cutting Punch
Inclined Feed Channel
0.2 Camera Inspection
Counter Sealing Roller
or Glassine Paper foil
product characteristics
COMPRESSED AIR PRESSURE
TECHNICAL SPECIFICATIONS
print resistered sealing
3.1 SPECIAL CHANGE-OVER
3.0 SPECIAL ACCESSORIES
2.0 STANDARD ACCESSORIES
2.2.2 Spare Stereo Drum
2.2 OPTIONAL CHANGE PARTS
CHILLED WATER REQUIREMENT
heat sealable VMCH lacquer
Checkered Engraved Pattern
9 Web Indexing Mechanism
Print Registration Control
2.0.10 Pack Punching Station
regular shaped solid articles
2.0.5 Thermoforming Station
2.1.1 Blister Forming Roller
1.0 GENERAL WORKING PRINCIPLE
3 Additional punching station
2.0.1 AC Variable Speed Drive
intermittent reciprocating motion
Photo Optical Print Image Control
automatic blister packing machine
ELECTRICAL POWER CONNECTION DETAILS
2.0.3 Rotary Contact Heating System
2.0.7 Pressure Sealing Roller Assembly
AUTOMATIC BLISTER PACKING MACHINE BLISTRIP
separate embossing / perforation 3.0.4 PLC control
