Automatic Blister Packing Machine
BLISTRIP–Ixt is automatic blister packing machines mainly utilised for packing of smaller and regular shaped solid articles such as pharmaceutical tablets, capsules, dragees etc., in blister packs. The Blister Forming, Product Feeding and Sealing operations are continuous by rotary motion while the indexing and punching operations are of intermittent reciprocating motion.
The output capacity of the machine depends on the product characteristics and thus on the type of feeding device. In case of slightly curved or flat tablets upto 10mm dia an output of 150 packs per minute for BLISTRIP – Ixt can be optimally achieved.
The packing materials namely PVC film and the lidding material namely Aluminium foil (or Glassine Paper foil) with heat sealable VMCH lacquer are required for blister packing and are drawn off from reel stock. The blister packs, which are punched out from main web, can either be collected in bins or transferred over a conveyor belt for further handling. The trim waste is sheared off in small pieces to allow easy disposal.
2.0 Standard Accessories And Mountings.
2.0.1 AC Inverter Variable Speed Drive.
2.0.2 Built in control Panel.
2.0.3 Rotary Contact Heating System for PVC Film.
2.0.4 Foil and Film Reel Holders.
2.0.5 Thermoforming Station with Vaccum Pump.
2.0.6 Automatic Product Feeding System with Vibrator.
2.0.7 Pressure Sealing Roller Assembly with Checkered Engraved Pattern.
(For sealing of continuously printed Alu Foil)
2.0.8 Web Indexing Mechanism (ratchet type).
2.0.9 Pack Punching Station.
2.0.10 Chilled Water Circulation Pump.
2.0.11 One Set of STANDARD CHANGE - OVER PARTS - as listed in point 2.1 below.
(To suit any one product, in one configuration)
2.0.12 Embossing Type Founts (Size 1.6mm X 3.2mm) (Standard)
2.1 Set Of Standard Change-Over Parts.
2.1.1 Blister Forming Roller.
2.1.2 Counter Sealing Roller.
2.1.3 Inclined Feed Channel.
2.1.4 Guide Track.
2.1.5 Cutting Punch (with B. No. Embossing Facility).
2.1.6 Synchronising Gears.
3.0 Special Accessories And Mountings (OPTIONS).
3.0.1 Flexographic Over Printing Unit.
3.0.2 Powder Suction Unit (De-Dusting Unit)
3.0.3 Vertical Feeding System
3.0.4 Water Chiller Unit (Built-in within the machine Frame)
3.0.5 Water Chiller Unit (External)
3.0.6 Photo Optical Print Image Control (Print Registration System Controller).
3.0.7 Non – Fill – Detection and Empty Pack Rejection System Controller.
3.1 Special Change - Over Parts.
3.1.1 Pressure Sealing Roller Assembly. (For Print Registered Sealing).
3.1.2 Ribbed Feed Bowl
3.1.3 Vertical Feed Channel
Keywords
1.3
1.6
Non
Fill
Size
bins
case
2.1.2
3.0.2
point
PARTS
B. No.
4 Foil
curved
minute
dragees
smaller
2.1 Set
One Set
OPTIONS
indexing
capsules
handling
Vibrator
10mm dia
Alu Foil
PVC film
main web
Detection
Mountings
150 packs
reel stock
trim waste
one product
Vaccum Pump
BLISTRIP–Ixt
flat tablets
ratchet type
Flexographic
small pieces
easy disposal
conveyor belt
control Panel
machine Frame
rotary motion
blister packs
Printing Unit
pharmaceutical
feeding device
Aluminium foil
output capacity
Standard Change
Product Feeding
De-Dusting Unit
lidding material
Ribbed Feed Bowl
Film Reel Holders
one configuration
packing materials
1.5 Cutting Punch
Sealing operations
3.1 Special Change
Embossing Facility
Synchronising Gears
Powder Suction Unit
punching operations
The Blister Forming
Vertical Feed Channel
Inclined Feed Channel
or Glassine Paper foil
Counter Sealing Roller
3.0 Special Accessories
product characteristics
3.0.5 Water Chiller Unit
2.0 Standard Accessories
Print Registered Sealing
3.0.4 Water Chiller Unit
12 Embossing Type Founts
Checkered Engraved Pattern
heat sealable VMCH lacquer
2.0.9 Pack Punching Station
2.0.5 Thermoforming Station
2.1.1 Blister Forming Roller
3.0.3 Vertical Feeding System
regular shaped solid articles
intermittent reciprocating motion
automatic blister packing machines
2.0.3 Rotary Contact Heating System
6 Photo Optical Print Image Control
Print Registration System Controller
Empty Pack Rejection System Controller
2.0.7 Pressure Sealing Roller Assembly
2.0.1 AC Inverter Variable Speed Drive
