Blister Packing Machine – BLISTRIP-IID
BRIEF DESCRIPTION
1.0 GENERAL WORKING PRINCIPLE
BLISTRIP–IID is automatic blister packing machines mainly utilised for packing of smaller and regular shaped solid articles such as pharmaceutical tablets, capsules, dragees etc., in blister packs. The Blister Forming, Product Feeding and Sealing operations are continuous by rotary motion while the indexing and punching operations are of intermittent reciprocating motion.
The output capacity of the machine depends on the product characteristics and thus on the type of feeding device. In case of slightly curved or flat tablets upto 10mm dia an output 250 packs per minute for BLISTRIP – II can be optimally achieved.
The packing materials namely PVC film and the lidding material namely Aluminium foil (or Glassine Paper foil) with heat sealable VMCH lacquer are required for blister packing and are drawn off from reel stock. The blister packs, which are punched out from main web, can either be collected in bins or transferred over a conveyor belt for further handling. The trim waste is sheared off in small pieces to allow easy disposal.
2.0 Standard Accessories And Mountings
2.0.1 AC Inverter Variable Speed Drive.
2.0.2 Built in control Panel.
2.0.3 Rotary Contact Heating System for PVC Film.
2.0.4 Foil and Film Reel Holders.
2.0.5 Thermoforming Station with Vaccum Pump.
2.0.6 Automatic Product Feeding System with Vibrator.
2.0.7 Pressure Sealing Roller Assembly with Checkered Engraved Pattern. (For sealing of continuously printed Alu Foil)
2.0.8 Web Indexing Mechanism (ratchet type).
2.0.9 Pack Punching Station.
2.0.10 Chilled Water Circulation Pump.
2.0.11 One Set of STANDARD CHANGE - OVER PARTS - as listed in point 2.1 below. (To suit any one product, in one configuration)
2.0.12 Embossing Type Founts (Size 1.6mm X 3.2mm) (Standard)
2.1 Set Of Standard Change-Over Parts
2.1.1 Blister Forming Roller.
2.1.2 Counter Sealing Roller.
2.1.3 Inclined Feed Channel.
2.1.4 Guide Track.
2.1.5 Cutting Punch (with B. No. Embossing Facility).
2.1.6 Synchronising Gears.
3.0 Special Accessories And Mountings (OPTIONS).
3.0.1 Flexographic Over Printing Unit.
3.0.2 Powder Suction Unit (De-Dusting Unit)
3.0.3 Vertical Feeding System
3.0.4 Water Chiller Unit (Built-in within the machine Frame)
3.0.5 Water Chiller Unit (External)
3.0.6 Photo Optical Print Image Control (Print Registration System Controller).
3.0.7 Camera Inspection and Rejection System.
3.0.8 Separate Station for Embossing / Perforation, independent from Cutting Punch
3.1 Special Change - Over Parts.
3.1.1 Pressure Sealing Roller Assembly. (For Print Registered Sealing).
3.1.2 Ribbed Feed Bowl
3.1.3 Vertical Feed Channel
3.1.4 Embossing / Perforation Tool for Separate Station
TECHNICAL SPECIFICATIONS
BASE MATERIAL: MAX WIDTH:
(PVC / PVC-PVDC / PE-PVDC)
0.2 TO .3 THICK; IN REEL FORM MAX. 440. - 210
LIDDING MATERIAL : MAX. WIDTH :
(HSL COATED HARD ALU / GLASSINE FOIL)
0.02 TO 0.04 THICK; IN REEL FORM MAX. 220. - 206
MAX. PACK SIZE : (1 UP) - 110 x 202
(2 UP) - 110 x 100
(3 UP) - 110 x 64
MIN. PACK SIZE : 25 x 45 (1 UP)
MAX. FORMING DEPTH: 10 mm (EXTENDABLE TO 20)
MAX. WEB SPEED : 5 METERS / MIN.
MAX. OUTPUT* : PACKS / MIN : 250 (2 UP)
350 (3 UP)
MAX. STROKES / MIN :150
COMPRESSED AIR PRESSURE (BAR) - 6
AIR CONSUMPTION (LIT / MIN) - 350
ELECTRICAL POWER CONNECTION Details - 440 V, 3PH, AC, +N, +EARTH (OTHER VOLTAGE ON REQUEST.)
POWER CONSUMPTION : PEAK - 7.5 kw
AVERAGE - 5 kw
CHILLED WATER REQUIREMENT : (18 TO 20 C) AT 3 BAR PRESSURE - 120 LIT / HR.
NET WEIGHT Kg.1, 700
GROSS WEIGHT Kg.2, 400
CASE DIMENSIONS : 3430 x 1400 x 1930(H)
ALL DIMENSIONS ARE IN MM.
*Output depends on pack size, pack configuration, product size & shape, product characteristics etc.
Keywords
UP
206
1.3
0.2
MM.
3PH
bins
PEAK
10mm
EARTH
2.1.2
440 V
10 mm
20 C
point
B. No.
7.5 kw
curved
minute
2.1 Set
smaller
One Set
dragees
120 LIT
REQUEST
PE-PVDC
OPTIONS
AVERAGE
3 THICK
capsules
Alu Foil
PVC film
External
5 METERS
handling
Vibrator
main web
WEB SPEED
MAX WIDTH
REEL FORM
Mountings
250 packs
reel stock
trim waste
OVER PARTS
0.04 THICK
MAX. WIDTH
Vaccum Pump
one product
MAX. OUTPUT
4 Embossing
BLISTRIP-IID
product size
ratchet type
flat tablets
BLISTRIP–IID
Flexographic
MAX. STROKES
small pieces
Size 1.6mm X
easy disposal
conveyor belt
machine Frame
BASE MATERIAL
GLASSINE FOIL
NET WEIGHT Kg
rotary motion
control Panel
blister packs
Printing Unit
OTHER VOLTAGE
MAX. PACK SIZE
MIN. PACK SIZE
pharmaceutical
Aluminium foil
feeding device
3 BAR PRESSURE
De-Dusting Unit
AIR CONSUMPTION
Product Feeding
output capacity
GROSS WEIGHT Kg
STANDARD CHANGE
CASE DIMENSIONS
Perforation Tool
lidding material
Ribbed Feed Bowl
Rejection System
Film Reel Holders
1.5 Cutting Punch
one configuration
BRIEF DESCRIPTION
POWER CONSUMPTION
packing materials
3.1 Special Change
Embossing Facility
MAX. FORMING DEPTH
Sealing operations
pack configuration
punching operations
HSL COATED HARD ALU
Powder Suction Unit
Synchronising Gears
Inclined Feed Channel
Vertical Feed Channel
3.0.8 Separate Station
Counter Sealing Roller
or Glassine Paper foil
product characteristics
3.0 Special Accessories
3.0.7 Camera Inspection
COMPRESSED AIR PRESSURE
Print Registered Sealing
2.0 Standard Accessories
3.0.5 Water Chiller Unit
TECHNICAL SPECIFICATIONS
12 Embossing Type Founts
3.0.4 Water Chiller Unit
CHILLED WATER REQUIREMENT
Checkered Engraved Pattern
heat sealable VMCH lacquer
2.0.9 Pack Punching Station
2.0.5 Thermoforming Station
2.1.1 Blister Forming Roller
2.0.8 Web Indexing Mechanism
regular shaped solid articles
3.0.3 Vertical Feeding System
1.0 GENERAL WORKING PRINCIPLE
intermittent reciprocating motion
automatic blister packing machines
2.0.3 Rotary Contact Heating System
ELECTRICAL POWER CONNECTION Details
6 Photo Optical Print Image Control
Print Registration System Controller
2.0.1 AC Inverter Variable Speed Drive
2.0.7 Pressure Sealing Roller Assembly
