Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +919167992017 (International callers) or +919167992017 (Indian callers).
Jicon manufactures complete granulation line equipments including the Blenders viz. Double Cone Blenders, Octagonal Blenders and V Blenders.
Size and technical specifications can vary based on the URS and Specs Sheet
*************************************************************************
Double Cone Blender:
The Double Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc.
The machine can be broadly divided in three parts viz.; main mixing vessel, stand or support structure and drive. The vessel is mounted on the stand on two pillow block ball bearings on each side. Drive, consisting of motor, gearbox etc. is also mounted on the stand.
Powders or granules that are to be mixed are loaded in the vessel. Vessel rotates around its central shaft, driven by the drive system. As the vessel rotates, powders start flowing due to gravitational force. Because of the conical shape of vessel, mass of flowing powders contract and expand continuously, achieving desired mixing or blending. Baffles attached to the central shaft obstruct the flow of powders generating cross flows that assist in quicker blending.
https://jicon.com/dry-powder-blenders.php
*************************************************************************
Octagonal Blender:
The OCTAGONAL BLENDER is an efficient and versatile blending machine for mixing and lubrication process of dry granules homogeneously. Octagonal Blender is suitable mainly for Crystalline & Granular material.
The Octagonal Blender gives best results for granules due to very slow speed and octagon shape of container. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc.
When the product container vessel of Octagonal Blender starts rotating, the granules start flowing due to gravitational force. Because of the octagonal shape of the product container, the granules generates cross flows as well as constantly shrinking and expanding volumes. This ensures uniform mixing hence can be run at lower RPM.
https://jicon.com/dry-powder-blenders.php
*************************************************************************
V Blender:
The machine is primarily suitable for mixing or lubricating of dry, freely flowing powders or granules. The machine has been designed for use in a pharmaceutical formulation manufacturing unit, in compliance with the latest GMP rules.
The machine can be broadly divided in three parts viz.; main mixing vessel, stand or support structure and drive. The vessel is mounted on the stand on two pillow block ball bearings on each side. Drive, consisting of motor, gearbox etc. is also mounted on the stand.
Powders or granules that are to be mixed are loaded in the vessel. Vessel rotates around its central shaft, driven by the drive system. As the vessel rotates, powders start flowing due to gravitational force. Due to the “V“ shape of container, the materials get sufficient continuous movement and hence requirement of RPM is medium that results in good quality blending / lubrication of granules without size reduction.
https://jicon.com/dry-powder-blenders.php
*************************************************************************
About Jicon Technologies:
Jicon Technologies is 38 yrs old leading brand, especially known for Manufacturing and Exporting of Pharmaceutical Machines in India, Nepal, Bangladesh, Sri Lanka, Philippines, Afghanistan, Iran, Iraq, Syria, Jordan, Turkey, Israel, United Arab Emirates, Saudi Arabia, Yemen, Egypt, Algeria, Sudan, Ethiopia, Kenya, Uganda, Tanzania, South Africa, Nigeria, Ghana, Russia, United States of America, El Salvador. Overall we have a happy and satisfied clientele across 50+ countries.
Automatic Flat Plate Blister Packing Machine (Ideal for Commercial High Output batches):
ALBLIS is a versatile ‘Flat Plate’ intermittent motion automatic blister packing machine that can produce Alu-Alu blister packs by cold forming method as well as PVC-Alu blister packs by thermoforming method. This machine is utilized for packing of smaller and regular shaped solid articles such as pharmaceutical Tablets, Capsules, Dragees etc. in Alu-Alu or PVC-Alu blister packs. This Machine can also be used for packing of Ampoules, Vials, Tubes in PVC-Alu blister packs. The Blister Forming, Sealing, Indexing and Punching operations are of intermittent reciprocating motion. Various types and styles of product feeding devices are offered to suit different applications.
The standard configuration of the machine is for producing Alu-Alu blister suitable for Pharmaceutical Tablets, Capsules, Dragees etc. The standard configuration may be opted out or can be combined with other configurations.
Some of the Important Features include:
# Quick Change Over
# Cost Efficient
# Suitable for Alu-Alu, PVC-Alu and PVC-Paper Blister Packs
# Can pack Tablets, Capsules, Dragees and also vials, Ampules, Tubes, Creams etc
# Simple Operation
# Cost Efficient
# Easy Maintainence
Technical Specifications:
# BASE MATERIAL: MAX WIDTH: 260mm
(COLD FORM LAMINATED ALU FOIL / PVC / PVC-PVDC, 0.2 TO .3 THICK; IN REEL FORM MAX. dia. 250mm)
# LIDDING MATERIAL: MAX. WIDTH: 260mm
(HSL COATED HARD ALU / GLASSINE FOIL, 0.02 TO 0.04 THICK; IN REEL FORM MAX. dia. 220mm)
# MAX. PACK SIZE: 250mm x 140mm
# MAX. FORMING DEPTH: 14mm
# MAX. OUTPUT* ie PACKS / MIN: 70 (Alu-Alu, 2 Tracks), 200 (Alu-PVC, 4 Tracks)
# MAX. STROKES / MIN: 35 (Alu-Alu), 50 (Alu-PVC)
Flat Plate Blister Packing Machine Ideal for R&D, pilot plants and small batch production:
ALBLIS is a versatile ‘Flat Plate’ intermittent motion automatic blister packing machine that can produce Alu-Alu blister packs by cold forming method as well as PVC-Alu blister packs by thermoforming method. This machine is utilized for packing of smaller and regular shaped solid articles such as pharmaceutical Tablets, Capsules, Dragees etc. in Alu-Alu or PVC-Alu blister packs. This Machine can also be used for packing of Ampoules, Vials, Tubes in PVC-Alu blister packs. The Blister Forming, Sealing, Indexing and Punching operations are of intermittent reciprocating motion. Various types and styles of product feeding devices are offered to suit different applications.
Some of the Important Features include:
# Simple Operation
# Ideal for small batch production
# Quick Change Over
# Cost Efficient
# Easy Maintenance
# Suitable for Alu-Alu, PVC-Alu and PVC-Paper Blister Packs
# Can pack Tablets, Capsules, Dragees and also vials, Ampules, Tubes, Creams etc
# Can be supplied without automatic product feeding system to make it suitable for R&D and Formulation Development applications
Technical Specifications:
# BASE MATERIAL: MAX WIDTH: 140mm
(COLD FORM LAMINATED ALU FOIL / PVC / PVC-PVDC, 0.2 TO .3 THICK; IN REEL FORM MAX. dia. 250mm)
# LIDDING MATERIAL: MAX. WIDTH: 40mm
(HSL COATED HARD ALU / GLASSINE FOIL, 0.02 TO 0.04 THICK; IN REEL FORM MAX. dia. 220mm)
# MAX. PACK SIZE: 110mm x 130mm (1 UP), 110mm x 62mm (2 UP)
# MIN. PACK SIZE: 40mm x 45mm
# MAX. FORMING DEPTH: 10mm (EXTENDABLE TO 20mm)
# MAX. OUTPUT* ie PACKS / MIN: 30 (1 UP) and 60 (2 UP)
# MAX. STROKES / MIN: 30
BLISTRIP–I xt is a single track automatic blister packing machine for packing of tablets, capsules, dragees etc., in blister packs using PVC-Alu packaging materials. The Blister Forming, Product Feeding and Sealing operations are continuous by rotary motion while the indexing and punching operations are of intermittent reciprocating motion.The output capacity of the machine depends on the product characteristics. In case of slightly curved or flat tablets up to 10mm dia an output of 150 packs per minute can be optimally achieved.
Features:
# Combi packs possible for better utilization of capacity and packaging materials
# Edge – to – edge cutting to eliminate trim waste between packs
# Special tool design reduces trim waste
# Continuous blister forming at low temperature by contact heating system
# All change over parts and adjustments accessible from front side
# Easy and quick change over reduces material wastage and down time
# Simpler operation reduces operator fatigue – increases output
# Very compact in size
Specifications:
# Max. Web Width 148 mm
# Max. Forming depth 10 mm (Expandable up to 20)
# Max. output: Packs/Min 150 (1 UP), 300 (2 UP)
# Max. Strokes/Min 150
Efficiency:
Our Competence and experience in package design ensures optimum utilization of machine capacity to give highest possible output as well as minimum possible packaging material consumption.
Performance:
Simplicity of design with careful placement of various stations giving operator full vision and total control of all principal functions of machine that enhances performance.
Reliability:
Solid structure and sturdy components together with easy to set up and maintain mechanism ensures maximum availability. Quick and easy change over from one format to another improves productivity.
Chat with us
Chat with us
